Jimi JM01 installation manual

Introduction to the Jimi JM01 Installation Manual

The Jimi JM01 is a GPS tracking device designed to provide security and accurate monitoring. To ensure optimal performance, it is essential to follow the installation guidelines correctly. In this manual, we will cover essential aspects such as the proper positioning of the GPS, power connection, SIM card installation, and procedures for verifying the device's operation.

Choosing the position of the GPS is crucial, as it directly influences signal reception. It is recommended to install the JM01 in a location that minimizes obstructions and interferences. Next, the power supply should be connected according to the manufacturer's specifications to avoid operational failures.

Inserting the SIM card also plays a vital role, as it ensures the device's communication with the network. After installation, it is important to conduct a thorough check to ensure that the Jimi JM01 is operating correctly and sending location data accurately.

For even more efficient management of your trackers, consider using the Trackar platform, which offers a one-time payment system and advanced monitoring features. Take advantage of all the benefits of the Jimi JM01 and maintain control over your tracking information.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone so that location information is accurate. Use the appropriate command to set the GMT.

GMT,W,0,0#

2. Update Time Configuration

The tracker’s update time can be adjusted between 5 and 18000 seconds. The interval X is the transmission time while the vehicle is moving, and Y is the time when the vehicle is stationary.

TIMER,60,3300#

3. Activate Voltage (External Voltage)

The external voltage setting should be adjusted as needed, with values ranging from 5 to 3600. This allows monitoring of the vehicle's voltage.

ADT,ON,3600#

4. Server Configuration

The servers must be configured correctly to ensure the device communicates with the tracking platform. Use the command to set the desired servers.

SERVER,1,central.trackar.com.br,5023,0#

5. Operator APN Configuration

The correct APN configuration is crucial for device connectivity. Check the operator's information and adjust as necessary.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. Activate GPRS

To connect the device to the network, it is necessary to activate GPRS. Use the corresponding command for this configuration.

GPRSON,1#

7. Activate Satellite Receiver

The satellite receiver can be activated for a period of 5 minutes to locate the device. Use the command to perform this activation.

GPSON#

Special commands

Special Commands

These additional commands allow for more advanced management of the device.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#