GPS TK10 Installation Manual
Introduction to the GPS TK10 Installation Manual
The GPS TK10 is an advanced solution for vehicle monitoring, offering features that ensure security and real-time tracking. This manual has been prepared to guide you in the physical installation of the device, addressing essential aspects such as the GPS position, connection to power supply, chip insertion, and verification of proper functioning.
Choosing the GPS position is crucial to ensure a strong and stable signal. It is recommended to install the TK10 in a location that minimizes obstructions and interferences. Next, the device's power supply must be connected correctly to ensure continuous operation. Inserting the chip is a fundamental step for data transmission, and system verification should be performed after installation to ensure everything is operating as expected.
With this manual, you will have a complete guide to ensure that the GPS TK10 is installed correctly, allowing you to make the most of its features. For even more effective monitoring, consider the Trackar platform, which offers a one-time payment system to manage your tracking needs. Install your GPS and start monitoring efficiently!
SMS Commands
1. Start of Configuration
To start using your tracker, it is necessary to begin the configuration of the equipment. Use the appropriate command for this.
begin123456
2. Time Zone Configuration
It is important to adjust the time zone of the device. The command to be used must include the correct configuration of your time zone, which can be adjusted as needed.
timezone123456 0
3. APN Configuration
The APN configuration is crucial for the functioning of the tracker. APN, username, and password information must be updated according to the details provided by the chip operator you are using.
apn,m2track.br,vivo,vivo#
apn123456 allcom.br
apn123456 allcom.vivo.com.br
apn123456 brt.br
apn123456 claro.com.br
apn123456 datatem.algar.br
apn123456 eseye.com
apn123456 gprs.amazoniacelular.com.br
apn123456 gprs.oi.com.br
apn123456 gprs.telemigcelular.com.br
apn123456 linksolutions.br
apn123456 m2data.algar.br
apn123456 m2data.arqia.br
apn123456 m2data.vivo.com.br
apn123456 m2m.vodafone.br
apn123456 m2mprepgago.br arqia arqia
apn123456 meta.vivo.com.br meta meta
apn123456 oktor.br
apn123456 sercomtel.com.br
apn123456 smart.m2m.vivo.com.br
apn123456 ss.algar.br
apn123456 tim.br
apn123456 tmdata.tim.br
apn123456 transmeet.br
apn123456 virtueyes.vivo.com.br
apn123456 voxter.algar.br
apn123456 voxter.br
apn123456 wap.ctbc.com.br
apn123456 wl.vivo.com.br
apn123456 y1.m2m.algar.com.br
apn123456 zap.vivo.com.br
4. IP and Port Configuration
To ensure the correct communication of the tracker, it is necessary to configure the IP and port of the server. Make sure to enter the correct data for each server you wish to use.
Servidor 01:
Servidor 02:
Servidor 03:
5. Enable GPRS Transmission
Activate data transmission via GPRS so that the tracker can send location information. Use the indicated command to enable this function.
gprs123456 1
6. Tracking Mode Configuration
Set the time interval for data transmission. The time can be adjusted in seconds, and the default is 60 seconds. Use the appropriate command to adjust this time.
itv123456 60
It is recommended to finalize the configurations after this step.
Special commands
Special Commands
Here are some special commands that can be used to check and modify specific settings of the device.
check123456
getimei123456
speed123456 80
speed123456 0
DY123456 1
TY123456 1
Own your tracking platform with a one-time payment