GPS G900 Installation Manual
Introduction to the GPS G900 Installation Manual
The GPS G900 is an advanced device designed to provide precise and reliable tracking. To ensure the best performance of your device, it is essential to follow the physical installation guidelines correctly. In this manual, we will cover the essential steps for installing the GPS G900, including the ideal position for the device, the necessary power supply, the installation of the SIM card, and the final system check.
The position of the GPS is crucial to ensure adequate signal reception, so choose a location that minimizes obstructions. Regarding power supply, make sure the device is connected to a stable power source. The installation of the SIM card should be done carefully, ensuring it is well positioned and connected. After installation, it is necessary to perform a check to confirm that the GPS is operating correctly and sending location data.
Following these steps will help maximize the performance of your GPS G900 and ensure an efficient tracking experience. For even more effective fleet management, consider using the Trackar platform, which offers a one-time payment and complete functionalities to optimize monitoring. Get ready to explore everything the GPS G900 has to offer!
SMS Commands
1. Start of Equipment Configuration
To begin the configuration of your GPS device G900, it is necessary to use the specific command. This step is crucial to ensure that the equipment is ready for use.
begin123456
2. Time Zone Configuration
Adjusting the time zone is essential for the tracker to function correctly. Use the appropriate command to set the time zone according to your location.
timezone123456 0
3. Carrier APN Configuration
Configuring the APN is essential for the tracker to connect to the data network. It is important to enter the correct APN, username, and password information, as they vary by carrier. Below are the commands for different APNs.
apn,m2track.br,vivo,vivo#
apn123456 allcom.br
apn123456 allcom.vivo.com.br
apn123456 brt.br
apn123456 claro.com.br
apn123456 datatem.algar.br
apn123456 eseye.com
apn123456 gprs.amazoniacelular.com.br
apn123456 gprs.oi.com.br
apn123456 gprs.telemigcelular.com.br
apn123456 linksolutions.br
apn123456 m2data.algar.br
apn123456 m2data.arqia.br
apn123456 m2data.vivo.com.br
apn123456 m2m.vodafone.br
apn123456 m2mprepgago.br arqia arqia
apn123456 meta.vivo.com.br meta meta
apn123456 oktor.br
apn123456 sercomtel.com.br
apn123456 smart.m2m.vivo.com.br
apn123456 ss.algar.br
apn123456 tim.br
apn123456 tmdata.tim.br
apn123456 transmeet.br
apn123456 virtueyes.vivo.com.br
apn123456 voxter.algar.br
apn123456 voxter.br
apn123456 wap.ctbc.com.br
apn123456 wl.vivo.com.br
apn123456 y1.m2m.algar.com.br
apn123456 zap.vivo.com.br
Make sure that the APN information is correct for the carrier used.
4. IP and Port Configuration
To ensure proper communication of the tracker, it is necessary to configure the IP and port of the server. Enter the desired server information.
Fill in the fields with the information for server 01, 02, and 03.
5. Enable GPRS Transmission
Activate data transmission via GPRS using the appropriate command. This is essential for the tracker to send real-time information.
gprs123456 1
6. Tracking Mode Configuration
Set the time interval for tracking, which can be adjusted according to your needs. The default value for transmission is 60 seconds.
itv123456 60
The transmission time can be adjusted as needed.
Special commands
Special Commands
Below are some special commands that can be used to check configurations and control the device.
check123456
getimei123456
speed123456 80
speed123456 0
DY123456 1
TY123456 1
Use these commands to monitor and control the device as needed.
Own your tracking platform with a one-time payment