Dyegoo GT02 Installation Manual

Introduction to the Dyegoo GT02 Installation Manual

The Dyegoo GT02 is a GPS tracking device designed to provide accuracy and reliability in locating vehicles and assets. The physical installation of this equipment is a crucial step to ensure its effective operation. In this section, we will address fundamental aspects such as the ideal position for installing the GPS, power supply options, inserting the SIM card, and verifying the device's operation.

Choosing the location for installing the Dyegoo GT02 should be strategic, aiming to minimize interference and ensure good signal reception. Additionally, it is essential to connect the device to the appropriate power source, ensuring that it remains active without interruptions. The insertion of the SIM card should be done carefully, ensuring that it is correctly positioned to allow effective communication. Finally, we will conduct a verification of the device's operation, ensuring that all settings are correct and that tracking is functioning as expected.

With the Dyegoo GT02 installed correctly, you will be ready to enjoy all the benefits of real-time tracking. To further enhance your experience, consider using the Trackar platform, which offers a one-time payment service for tracking management. Don't miss the opportunity to optimize the security of your assets!

SMS Commands

1. Time Zone Configuration

The first essential step is to adjust the device's time zone. This ensures that all operations and location records are correctly synchronized with the local time.

801#W0#

2. Carrier APN Configuration

Configuring the APN is crucial for the proper functioning of the tracker. The information must be entered correctly, as it varies depending on the carrier and the SIM card used. Make sure to use the correct APN, username, and password.

802#claro.com.br#claro#claro#

802#smart.m2m.vivo.com.br#vivo#vivo#

802#transmeet.br#transmeet#transmeet#

802#zap.vivo.com.br#vivo#vivo#

3. DNS and Port Configuration

In this step, you must define the DNS servers and the ports that the device will use to connect. This is essential to ensure proper communication between the tracker and the server.

803#central.trackar.com.br#6002#

4. Setting Transmission Time in Motion

Adjust the transmission interval of the tracker while it is in motion. The time can be configured between 10 and 60 seconds, allowing flexibility according to monitoring needs.

730#60#

5. Setting Transmission Time When Stationary

Here, you can adjust the transmission time while the device is stationary. The interval can be configured between 1 and 60 minutes, allowing for more efficient tracking control.

SUP#55#

It is recommended to finalize the settings after this step.

Special commands

6. Special Commands

These additional commands allow you to check and manage various functions of the device.

886#

CIP#

902#

NUP#

222#

333#

930#

666#

C10#

901#

940#

Use these commands as needed to monitor and configure the tracker.