Installation Manual for Concox Start S-2010

Introduction to the Installation Manual for the Concox Start S-2010

The Concox Start S-2010 is a robust and versatile GPS tracking device designed to provide an efficient monitoring solution. In this manual, we will cover the essential steps for the physical installation of your device, ensuring that you can enjoy all the features it offers.

For proper installation, it is crucial to choose the ideal position for the GPS, ensuring that it has a clear view of the sky, which maximizes signal reception. Additionally, the power supply to the device must be done safely and steadily, using the correct source to avoid damage. Inserting the SIM card is another crucial step; make sure it is well positioned and that the data plan is active so that tracking works without interruptions.

After installation, it is important to perform a complete system check, testing communication and tracking accuracy. With the Concox Start S-2010 correctly installed, you will be able to monitor your properties or vehicles with confidence.

To manage your tracking information conveniently and effectively, consider the Trackar platform, which offers a one-time payment for full access to its features. Make the most of your device with Trackar!

SMS Commands

1. Time Zone Configuration

It is essential to start configuring your tracker by adjusting the time zone. This ensures that all location and time information is correct and synchronized with your region.

GMT,W,0,0#

2. Update Interval Adjustment

Set the time interval at which the tracker will send updates of its location. You can adjust the time for different conditions: moving and stationary. This helps optimize battery usage and the accuracy of information.

TIMER,20,20#

3. Angle Update

Configure the tracker to update its location based on a specific angle. This allows the device to respond to changes in direction more efficiently, increasing the accuracy of updates.

ANGLEREP,ON,30,2#

4. Heartbeat

Adjust the interval for sending information from the tracker based on the vehicle's ignition status. This helps save battery when the vehicle is off but ensures you receive updates when necessary.

HB,1,55#

5. Server Configuration

It is important to configure the server correctly to ensure that the tracker data is sent to the correct platform. You can set the primary server and backups.

SERVER,1,central.trackar.com.br,5019,0#

6. APN Configuration

The APN configuration is crucial for the tracker to connect to the carrier's network. The APN, username, and password information must be entered correctly, as they vary according to the carrier providing the chip.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

Use this command to force the tracker to send its location every 5 minutes. This can be useful in situations where it is necessary to monitor the vehicle's position in real-time.

LJDW#

Special commands

Special Commands

Below are some special commands that can be used to query and modify the tracker settings.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Attention: some commands may consume more battery from the vehicle.