Concox SL44 Installation Manual

Introduction to the Concox SL44 Installation Manual

The Concox SL44 model is an advanced GPS tracking solution designed to provide accuracy and reliability in your monitoring operations. This manual aims to guide you through the physical installation process of the device, ensuring that you make the most of its features.

For effective installation, it is essential to consider the ideal position of the GPS. The device should be installed in a location that minimizes obstructions and maximizes signal reception. Additionally, the power supply for the Concox SL44 should be secured, ensuring a stable and continuous power source.

Another important aspect is the insertion of the SIM card, which must be compatible and properly activated for tracking to function correctly. After installing the device, it is advisable to conduct a thorough check to ensure that all connections are secure and that the device is operating as expected.

By following these guidelines, you will ensure an efficient installation of the Concox SL44. To further enhance your tracking experience, consider using the Trackar platform, which offers a one-time payment system, facilitating the management and monitoring of your operations.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone to ensure accuracy in location records. Use the appropriate command to set the correct zone.

GMT,W,0,0#

2. Update Interval Configuration

Set the time interval for updating location information. The first value refers to the vehicle's movement, while the second applies when the vehicle is stationary.

TIMER,20,20#

3. Angle Update

Configure location updates based on a specific angle and detection time. This helps optimize the accuracy of the received information.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

Adjust the interval for sending information when the vehicle's ignition is on and off. This allows for more efficient monitoring of the device.

HB,1,55#

5. Server Configuration

It is necessary to correctly configure the server and port to ensure proper communication of the tracker. Use the commands to set the servers.

SERVER,1,central.trackar.com.br,5023,0#

6. APN Configuration

APN, username, and password information must be adjusted according to the chip operator used. This is crucial for the device's connectivity.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

Use this command to force the tracker to send its current position for a period of 5 minutes, which can be useful for real-time monitoring.

LJDW#

Special commands

8. Special Commands

Special commands allow you to query and modify various settings of the tracker. Use them with caution.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Attention: some commands may consume more vehicle battery.