Concox SL28 Installation Manual

The Concox SL28 is a GPS tracking device designed to provide security and effective monitoring. This installation manual aims to guide you through the physical setup process of your device, addressing essential aspects such as the ideal GPS position, device power supply, SIM card installation, and functionality verification.

To optimize the performance of the Concox SL28, it is crucial to choose an appropriate position for the GPS, ensuring it has good signal reception. The power supply must be connected correctly to avoid interruptions in operation, and the SIM card should be installed properly to ensure communication. After installation, conducting a complete verification of the device is crucial to confirm that it is operating as expected.

Remember to follow all instructions carefully to ensure a successful installation. Make the most of your Concox SL28 with the Trackar platform, which offers a robust monitoring system with a one-time payment. Stay in control at all times!

SMS Commands

1. Time Zone Configuration

It is essential to correctly adjust the device's time zone to ensure that location information is accurate. Use the appropriate command to set GMT.

GMT,W,0,0#

2. Update Interval Configuration

Set the update interval for the tracker while in motion and stationary. The first value refers to the time in motion and the second when stationary. Adjust as needed.

TIMER,20,20#

3. Angle Update

Configure location updates based on a specific angle and detection time. This helps optimize tracking in motion situations.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is the interval at which the tracker sends data when the ignition is on or off. Adjust these values to meet your monitoring needs.

HB,1,55#

5. Server and Port Configuration

It is essential to configure the server and port correctly to ensure communication between the tracker and the monitoring platform. Use the appropriate commands for this.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN settings are crucial for the tracker to connect to the carrier's network. It is important to enter the correct data, which varies according to the chip supplier and the carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

This command is useful for forcing the tracker to send its positions during a specific period. Ideal for situations where intense monitoring is required.

LJDW#

Special commands

Special Commands

These commands offer additional functionalities for the tracker, allowing for quick queries and adjustments.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#