Concox JV200 installation manual

Introduction to the Concox JV200 Installation Manual

The Concox JV200 is an advanced GPS device designed to provide efficient and secure tracking across various applications. To ensure the optimal functioning of your equipment, it is essential to follow the installation instructions correctly. In this section, we will address crucial aspects such as the GPS positioning, power supply, SIM card insertion, and verifying the device's operation.

Choosing the position for the installation of the Concox JV200 is essential to optimize GPS signal reception. It is recommended that the equipment be installed in a high location free of obstructions, such as metal or other objects that may interfere with communication. Regarding power supply, make sure to connect the device to an appropriate power source to ensure its continuous operation.

Additionally, the correct insertion of the SIM card is imperative for data transmission. After installation, perform a thorough check to confirm that the device is operating as expected. Follow each of these steps carefully to maximize the efficiency of your Concox JV200.

For even more effective monitoring, consider using the Trackar platform, which offers a one-time payment solution to manage all your devices in a practical and intuitive way.

SMS Commands

1. Factory Reset

To restore the factory settings of the tracker, use the appropriate command. This will reset all settings to the original defaults.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

Adjust the device's time zone to ensure that location data is recorded correctly. Use the command below for this configuration.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. APN Configuration

It is essential to enter the correct APN, username, and password information, as these vary according to the carrier of the SIM card used. Below are the commands for different carriers.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure that the information is correct for the carrier in use.

4. DNS and Port Configuration

Set the DNS servers and communication port for the tracker. This configuration is essential to ensure proper communication between the device and the server.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5023,,,,0,0,0,1,,,FFFF$

5. Sending Interval Configuration

Adjust the data sending interval and detection angle. This configuration allows you to customize the frequency of communication between the device and the server.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

Configure the external battery of the device to ensure it operates properly during power outages. Use the command below to set the parameters.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Perform the global configuration of the device to adapt it to your needs. This command allows you to adjust several settings at once.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activate the tow alarm to increase vehicle security. This configuration helps detect unauthorized towing attempts.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use the position request command. This is useful for real-time monitoring.

AT+GTRTO=gv55,1,,0,,,,FFFF$

Special commands

1. Special Commands

Here are some special commands that can be used for specific functions of the device.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$