Installation Manual for Concox GV55

Introduction to the Concox GV55 Installation Manual

The Concox GV55 is an advanced GPS device designed to provide accurate and reliable tracking. In this manual, we will cover the physical installation of the equipment, ensuring that you can take full advantage of all the functionalities it offers. Proper installation is crucial to optimize the device's performance, and this guide will provide detailed information on the ideal GPS position, power connection, SIM card insertion, and necessary verification steps to ensure proper operation.

When positioning the Concox GV55, it is essential to choose a location that maximizes GPS signal reception, avoiding obstructions that may compromise communication. The power supply should be connected according to the manufacturer's specifications, ensuring that the device is always ready for operation. The SIM card insertion should be done carefully, following the guidelines to avoid damaging the device.

Finally, we will perform a verification of the Concox GV55's functionality, ensuring that all configurations are correct and that tracking is active. To further optimize your experience, consider using the Trackar platform, which offers a one-time payment service for effective management of your tracker. Make the most of your Concox GV55 with proper installation!

SMS Commands

1. Perform Factory Reset

To restore the device to factory settings, use the specified command. This is useful for troubleshooting or reconfiguring the device.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Set Time Zone

Adjust the device's time zone to ensure that location and time data are correct. Use the appropriate command for this configuration.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. Configure Carrier APN

It is essential to enter the correct APN, username, and password information, as these vary depending on the chip provider and carrier. Below are the commands for different carriers.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure the information is correct to avoid connection issues.

4. Configure DNS and Port

Configuring the DNS server and port is crucial for the correct communication of the device. Use the commands below to set the servers.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Set Sending Interval

Adjust the data sending interval and angle configuration as needed. The device can be configured to send information under different conditions.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. Configure External Battery

Configuring the external battery is important to ensure that the device operates correctly in power outage situations. Use the appropriate command.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Global settings allow you to customize the operation of the device. Use the provided command to apply the desired changes.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activate the tow alarm to enhance vehicle security. Use the command below for this configuration.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, send the corresponding command. This is useful for monitoring the position in real-time.

AT+GTRTO=gv55,1,,0,,,,FFFF$

Special commands

Special Commands

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$