Installation Manual for Concox GV50LTA

Introduction to the Installation Manual for Concox GV50LTA

The Concox GV50LTA is a GPS tracking device designed to offer real-time monitoring with high precision. To ensure the proper functioning of this equipment, it is essential to follow the physical installation instructions correctly. In this section, we will address the essential points you should consider during installation, such as the ideal position for the GPS, power connection, SIM card insertion, and functionality verification after installation.

Choosing the position of the GPS is crucial for optimizing signal reception. Install the device in a location that minimizes obstructions and interferences. Proper power supply to the GV50LTA is equally important; make sure to securely connect the wires to avoid operational failures. Do not forget to insert a compatible SIM card, which will enable data transmission to the monitoring platform. Finally, after installation, perform a check to confirm that the device is operating as expected.

For effective and practical monitoring, try the Trackar platform, which offers a one-time payment and advanced features to easily manage your tracking devices.

SMS Commands

1. Factory Reset

To restore the device to factory settings, a specific command must be sent. This can be useful if the device has issues or if you want to completely reconfigure it.

AT+GTRTO=gv50,4,,,,,,FFFF$

2. Time Zone Configuration

Adjusting the device's time zone is essential to ensure accurate location data. Use the appropriate command to set the time correctly.

AT+GTTMA=gv50,+,0,0,0,,,,,,FFFF$

3. Configure Carrier APN

It is important that the APN, username, and password information are entered correctly, as they vary according to the carrier of the SIM card used. Here are the commands for different providers.

AT+GTBSI=gv50,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv50,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv50,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv50,datelo.com.br,claro,claro,,,,,FFFF$

AT+GTBSI=gv50,jbgprs.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv50,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv50,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv50,upchip.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure to replace the values with what is specific to your carrier.

4. Configure DNS and Port

Configuring the DNS server and port is essential to ensure proper communication of the tracker with the monitoring platform. Use the commands below to configure.

AT+GTSRI=gv50,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Send Interval

Adjusting the data sending interval is crucial to optimize battery consumption and ensure that information is sent in real-time. You can configure the time and communication angle.

AT+GTFRI=gv50,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

If you are using an external battery, it is important to configure the correct parameters to ensure the proper functioning of the device.

AT+GTEPS=gv50,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Global settings allow you to adjust various parameters of the device to function according to your needs. Use the command below to make these settings.

AT+GTCFG=gv50,gv50,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activating the tow alarm is a security measure that can help protect your vehicle from theft. Use the command to enable this function.

AT+GTTOW=gv50,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, you can send a specific command that will return the GPS position. This is useful for real-time monitoring.

AT+GTRTO=gv50,1,,0,,,,FFFF$

Special commands

Special Commands

Here are some special commands that can be used for specific functions of the device.

AT+GTRTO=gv50,3,,,,,,FFFF$

AT+GTHMC=gv50,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv50,D,,,,,,FFFF$

AT+GTRTO=gv50,0,,0,,,,FFFF$

AT+GTRTO=gv50,7,,0,,,,FFFF$

AT+GTJDC=gv50,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv50,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv50,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv50,0,0,0,0,0,0,,,,0,,,,,,,FFFF$