Concox GV500 Installation Manual

Introduction to the Concox GV500 Installation Manual

The Concox GV500 is a robust and reliable GPS tracking device designed to meet monitoring needs in various applications. To ensure effective and functional installation, it is essential to follow some key steps. In this manual, we will cover the physical installation of the device, which includes choosing the appropriate position for the GPS, correctly connecting the power supply, inserting the SIM card, and verifying the operation of the equipment.

Choosing the position of the GPS is crucial, as improper installation can compromise signal quality and, consequently, tracking efficiency. Additionally, the power supply must be connected securely to ensure that the device operates continuously without interruptions. The insertion of the SIM card should be done carefully, ensuring that it is correctly positioned to avoid communication failures.

Finally, a thorough verification after installation is necessary to ensure that all functions of the Concox GV500 are operating as expected. Follow our step-by-step guide for a successful installation and make the most of your device's features.

Also discover the Trackar platform, which offers a tracking service with a one-time payment, ideal for managing your devices conveniently and efficiently.

SMS Commands

1. Factory Reset

To restore the device to factory settings, use the appropriate command. This can be useful in situations where the tracker is not functioning correctly or needs to be reconfigured.

AT+GTRTO=gv50,4,,,,,,FFFF$

2. Time Zone Configuration

Adjusting the time zone is essential to ensure that location data is recorded correctly. Use the command below to set the desired time zone.

AT+GTTMA=gv50,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

It is essential to configure the APN, username, and password according to the specifications of the carrier used. The information may vary, so check with your provider before proceeding.

AT+GTBSI=gv50,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv50,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv50,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv50,datelo.com.br,claro,claro,,,,,FFFF$

AT+GTBSI=gv50,jbgprs.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv50,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv50,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv50,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv50,upchip.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv50,voxter.algar.br,nlt,nlt,,,,,FFFF$

4. DNS and Port Configuration

Configuring the DNS server and port is crucial to ensure that the tracker connects correctly to the network. Use the following commands to set the desired servers.

AT+GTSRI=gv50,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Sending Interval

Configuring the data sending interval is important to optimize the device's communication. It is possible to adjust both the communication time when the ignition is on and when it is off.

AT+GTFRI=gv50,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

To ensure the proper functioning of the tracker, it is necessary to configure the external battery. Use the command below to set the appropriate parameters.

AT+GTEPS=gv50,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Adjusting the global settings of the device is essential for its correct operation. Use the command below to set the desired preferences.

AT+GTCFG=gv50,gv50,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activating the tow alarm can increase the vehicle's security. Use the command below to enable this function.

AT+GTTOW=gv50,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use the position request command. This is useful for real-time monitoring.

AT+GTRTO=gv50,1,,0,,,,FFFF$

Special commands

1. Special Commands

In addition to standard settings, there are special commands that can be used for specific functions of the device.

AT+GTRTO=gv50,3,,,,,,FFFF$

AT+GTHMC=gv50,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv50,D,,,,,,FFFF$

AT+GTRTO=gv50,0,,0,,,,FFFF$

AT+GTRTO=gv50,7,,0,,,,FFFF$

AT+GTJDC=gv50,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv50,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv50,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv50,0,0,0,0,0,0,,,,0,,,,,,,FFFF$