Installation Manual for Concox GT06N

Introduction to the Installation Manual for the Concox GT06N

The Concox GT06N is a GPS tracking device designed to offer accuracy and reliability in your monitoring applications. To ensure proper functioning, the physical installation of the device must be carried out with attention to technical specifications. In this manual, we will cover the essential steps for the correct installation of the GT06N, including choosing the ideal position for the GPS, connecting the power supply, inserting the SIM card, and verifying the device's operation.

Choosing the installation position is crucial, as it should allow for clear reception of satellite signals, avoiding obstructions that could compromise tracking accuracy. Additionally, the device's power supply must be securely connected to ensure that the GPS operates continuously without interruptions. The insertion of the SIM card should be done carefully, ensuring that the card is well positioned for effective communication.

After installation, it is essential to verify that the Concox GT06N is functioning correctly by conducting tracking tests to confirm the device's effectiveness. To further optimize your monitoring experience, consider using the Trackar platform, which offers a practical solution with a one-time payment to efficiently manage your trackers.

SMS Commands

1. Factory Reset

To perform a factory reset of the device, use the appropriate command. This will restore all settings to factory defaults.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

It is essential to correctly configure the time zone to ensure that location data is accurate. Use the indicated command to adjust the time zone.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

The APN configuration is crucial and must be adjusted according to the service provider's specifications. Enter the correct APN, username, and password according to your carrier.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

Check that the data is correct to avoid connection issues.

4. DNS and Port Configuration

Configuring the DNS servers and port is essential for the device's communication. Use the appropriate commands to adjust the settings as needed.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5023,,,,0,0,0,1,,,FFFF$

5. Sending Interval

The data sending interval can be adjusted as needed. You can set the time in seconds and the angle in degrees for the device's communication.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

To optimize the use of the external battery, use the appropriate command to adjust the device's power settings.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

The device's global settings can be adjusted with the specific command, allowing you to customize the operation of the tracker.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

The tow alarm can be activated to protect the vehicle. Use the appropriate command to enable this function.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use the specific command that requests the position.

AT+GTRTO=gv55,1,,0,,,,FFFF$

This command is useful for checking the location in real-time.

Special commands

10. Special Commands

Special commands allow for additional actions on the device, such as rebooting and clearing memory.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$