Installation Manual for Concox GT06D

Introduction to the Installation Manual for Concox GT06D

The Concox GT06D is a robust and efficient GPS tracking device designed to provide precise real-time location. To ensure optimal performance, correct installation is essential. This manual will guide you through the necessary steps for the physical installation of your GPS, addressing crucial points such as choosing the ideal position for the device, connecting the power supply, inserting the SIM card, and verifying functionality.

The GPS position should be chosen carefully to avoid obstructions that may interfere with the signal. The power supply should be connected according to the manufacturer's specifications, ensuring that the equipment operates continuously. Inserting the SIM card is fundamental for the device's communication with the tracking platform. Finally, verifying the operation of the Concox GT06D ensures that all components are functioning correctly before use.

Follow the guidelines in this manual for effective installation and enjoy all the benefits that the Concox GT06D has to offer. For even more convenient management, consider the Trackar platform, which offers a one-time payment for complete tracking and additional functionalities.

SMS Commands

1. Factory Reset

To restore the device to factory settings, use the appropriate command. This is essential for resolving configuration issues and ensuring that the tracker functions correctly from the start.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

Adjust the device's time zone to ensure accurate location data. This step is crucial for the correct synchronization of event times recorded by the tracker.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. APN Configuration

Configuring the APN is vital for the tracker to connect to the carrier's network. Make sure to enter the correct data according to the chip provider and carrier used. Below are the commands for different providers.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure that the APN, username, and password data are correct.

4. DNS and Port Configuration

It is necessary to configure the DNS servers and port to ensure that the device connects correctly to the tracking platform. Use the commands below to set the appropriate information.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5023,,,,0,0,0,1,,,FFFF$

5. Sending Interval

Define the data sending interval and the movement angle. This allows the tracker to send information at regular intervals, adjusting as needed.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

Configure the device's external battery to ensure it operates properly even when not connected to the main power source.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Perform the global configuration of the device to adjust parameters that affect its overall operation. This is important to customize the tracker according to your needs.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activate the tow alarm to protect your vehicle against theft attempts. This function is essential for increasing the security of your tracker.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

To obtain the current location of the device, use this command. This is useful for monitoring the tracker in real-time and checking its exact position.

AT+GTRTO=gv55,1,,0,,,,FFFF$

This command should be used after all configurations to ensure that the device is sending the location correctly.

Special commands

10. Special Commands

These additional commands allow you to perform specific functions on the device, such as restarting, clearing memory, and activating jamming detection.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$