Installation Manual for Concox GT02A

Introduction to the Installation Manual for the Concox GT02A

The Concox GT02A is an advanced GPS tracking device designed to provide effective and accurate monitoring solutions. In this manual, we will address the physical installation of the device, a crucial step to ensure its optimal functioning.

To begin, it is crucial to choose the appropriate position for the GPS installation. The location should be discreet but with good visibility for the GPS signal, avoiding obstructions that may compromise performance. Next, the device's power supply should be correctly connected, using the recommended power source to ensure continuous operation.

Another important point is the insertion of the SIM chip, which must be compatible with the network used and properly activated. After installation, it is recommended to perform an initial check of the Concox GT02A's functionality, ensuring that all settings are correct and that the device is sending location data accurately.

To optimize your tracking experience, consider using the Trackar platform, which offers a one-time payment system to manage your information conveniently and efficiently. Install your Concox GT02A with care and enjoy all the benefits that tracking technology can provide.

SMS Commands

1. Time Zone Configuration

The first step is to adjust the device's time zone. It is essential that this setting is correct to ensure that location data is accurate.

GMT,666666,W,0#

2. Carrier APN Configuration

At this stage, it is essential to configure the APN according to the chip provider used. The APN, username, and password information must be entered correctly, as they vary by provider. Check every detail to ensure connectivity.

APN,666666,internet,tmn,tmnnet#

APN,666666,smart.m2m.vivo.com.br,vivo,vivo#

APN,666666,transmeet.br,transmeet,transmeet#

APN,666666,upchip.br,vivo,vivo#

APN,666666,voxter.br,algar,algar#

APN,666666,zap.vivo.com.br,vivo,vivo#

Make sure the data is correct to avoid connection issues.

3. DNS and Port Configuration

Configure the DNS servers to ensure that the tracker operates properly. It is possible to set multiple servers to increase connection reliability.

SERVER,666666,1,central.trackar.com.br,6002,0#

4. GPRS Mode Activation

Activate GPRS mode so that the device can connect to the mobile data network. This is crucial for the tracker's operation.

GPRSON,666666,1#

5. Update Interval

Set the tracker’s update interval, which can be adjusted between 10 to 1800 seconds. A shorter interval provides more frequent updates but may consume more battery.

TIMER,666666,,60#

The minimum value is 10 seconds and the maximum is 1800 seconds.

Special commands

Special Commands

These commands allow you to perform specific operations with the tracker. Use them as needed.

Status,666666#

URL,666666#

WHERE,666666#

Param,666666#

FACTORY,666666#