Installation Manual for Concox G19S

Installation Manual for the Concox G19S

The Concox G19S is a GPS tracking device designed to provide accuracy and reliability for your monitoring needs. In this manual, we will cover the essential steps for the physical installation of your GPS, ensuring that you can make the most of its functionalities.

When starting the installation, it is crucial to choose an appropriate position for the GPS, ensuring that the signal is optimized and that the device is protected from the elements. The power supply for the Concox G19S should be done correctly, using the specified power source to avoid damage to the equipment. Additionally, the insertion of the SIM card should be done carefully, following the manufacturer's instructions, to ensure proper communication of the device.

Finally, do not forget to perform a complete check after installation. This includes testing the GPS connectivity and ensuring that all functions are operating as expected. With the correct installation, the Concox G19S will become a valuable tool for your monitoring.

To optimize your tracking experience, consider the Trackar platform, which offers a one-time payment and advanced features for managing your information. Make the most of your Concox G19S!

SMS Commands

1. Time Zone Configuration

The first step is to adjust the device's time zone. This is essential to ensure that location data is accurate in relation to the local time.

GMT,W,0,0#

2. Update Interval Configuration

In this step, you can set the tracker’s update interval. The interval can be adjusted for different situations, such as moving or stationary.

TIMER,20,20#

X represents the interval when moving and Y the interval when stationary.

3. Angle Update

Configure the tracker to update its location based on a specific angle. This is useful for monitoring changes in direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

Adjust the device's heartbeat interval, which determines how often it sends data when the ignition is on or off.

HB,1,55#

5. Server Configuration

It is necessary to configure the server for the tracker. You can set up to three servers, but all must have the same information.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

The correct APN configuration is crucial for the tracker’s operation. The information may vary according to the carrier, so it is important to check the specific data.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

This command allows the tracker to send its positions for a period of five minutes. This can be useful for real-time monitoring.

LJDW#

Special commands

Special Commands

These additional commands allow you to manage and query the tracker's settings.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Use these commands with caution, as some may alter important device settings.