Concox G19H Installation Manual

The Concox G19H is an advanced GPS device that offers an effective solution for monitoring and tracking. Proper installation is crucial to ensure its optimal functioning. In this manual, we will cover the essential aspects of physical installation, including the GPS position, power supply, SIM card insertion, and procedures for verifying the device's operation.

To maximize the efficiency of the Concox G19H, it is important to choose an installation location that minimizes obstructions and signal interference. The power supply should be securely connected, ensuring that the device receives adequate energy. The SIM card insertion should be done carefully, ensuring that it is well positioned for effective communication.

After installation, it is essential to conduct a complete system check to confirm that the device is operating correctly and sending real-time data. The Concox G19H, when installed correctly, provides an exceptional tracking experience.

To further enhance your experience, consider using the Trackar platform, which offers a one-time payment service, ideal for managing and monitoring your devices conveniently and efficiently.

SMS Commands

1. Time Zone Configuration

It is essential to start the tracker configuration by adjusting the time zone. This ensures that location information is accurate and corresponds to the vehicle's locality.

GMT,W,0,0#

2. Update Time Configuration

The update time is an important parameter that defines the frequency with which the tracker will send location information. You can adjust the sending intervals while the vehicle is in motion or stopped.

TIMER,20,20#

3. Angle Update

This configuration allows the tracker to update its position based on a specific angle. This can be useful for accurately monitoring changes in direction.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is a signal sent periodically to indicate that the tracker is active. You can adjust the sending interval based on the vehicle's ignition status.

HB,1,55#

5. DNS and Port Configuration

It is necessary to configure the server details to ensure that the tracker connects correctly to the monitoring platform. Server information must be entered accurately.

SERVER,1,central.trackar.com.br,5023,0#

6. Carrier APN Configuration

APN settings are essential to ensure that the tracker can connect to the internet. Make sure to enter the correct information according to the chip carrier used.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Force Position Sending

If necessary, you can force the tracker to send its position for a period of 5 minutes. This can be useful for real-time monitoring.

LJDW#

Special commands

8. Special Commands

Here are some special commands that can be used for additional queries and configurations of the tracker.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Remember that some commands may consume more vehicle battery.