Concox G19 installation manual

Introduction to the Concox G19 Installation Manual

The Concox G19 is a GPS tracking device designed to provide accuracy and reliability in its monitoring operations. In this manual, we will address the physical installation of the device, a crucial step to ensure its full functionality.

First, it is essential to choose the appropriate position for the GPS installation. The location should be discreet yet accessible, in order to avoid interference and ensure a strong signal. Additionally, the device's power supply must be properly connected, ensuring that the Concox G19 has enough energy to operate continuously.

Another important point is the insertion of the SIM card, which must be done carefully to ensure that data communication is always active. After the physical installation, it will be necessary to verify the operation of the device to ensure that all components are functioning as expected.

By following these guidelines, you will be able to enjoy all the functionalities of the Concox G19 effectively and securely. To further optimize your experience, consider using the Trackar platform, which offers a one-time payment solution for complete tracking management.

SMS Commands

1. Time Zone Configuration

The first essential step is to configure the device's time zone. This ensures that location information is recorded correctly according to your region.

GMT,W,0,0#

2. Update Time Definition

Adjust the location update interval. You can set different times for when the vehicle is in motion and when it is stationary, allowing for more efficient communication management.

TIMER,20,20#

X represents the interval in motion and Y the interval when stationary.

3. Angle-Based Update

Configure the location update of the tracker based on a specific angle. This helps optimize accuracy during movement.

ANGLEREP,ON,30,2#

The angle is defined in degrees, and you can adjust the detection time.

4. Heartbeat

The heartbeat function allows the tracker to send updates at regular intervals, depending on whether the ignition is on or off.

HB,1,55#

X is the interval with ignition on and Y with ignition off.

5. DNS and Port Configuration

It is crucial to correctly configure the server and port to ensure that the tracker connects to the appropriate network.

SERVER,1,central.trackar.com.br,5023,0#

Make sure the server address is correct.

6. APN Configuration

Configuring the APN is essential and must be adjusted according to the carrier used. Incorrect information can result in communication failures.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

Make sure to use the correct details for your carrier.

7. Force Position Sending

If you need to send the tracker's location immediately, you can force the sending for a period of 5 minutes.

LJDW#

Special commands

8. Special Commands

Here are some additional commands that can be used to manage and query the tracker's settings.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Be sure to use these commands carefully to avoid unwanted changes to the settings.