Installation Manual for Concox GT03B

Introduction to the Concox GT03B Installation Manual

Welcome to the installation manual for the Concox GT03B, an advanced GPS device that provides accurate and reliable tracking for vehicles and objects. Proper installation of this tracker is essential to ensure its optimal performance. In this guide, we will cover essential aspects of physical installation, including choosing the GPS position, connecting power, inserting the SIM card, and verifying the device's operation.

The position of the GPS is crucial for receiving adequate signals. It is recommended to install the Concox GT03B in a location that minimizes interference, such as under the vehicle's dashboard or in areas with good visibility of the sky. The power supply should be connected securely, following the manufacturer's specifications to avoid damaging the device. The SIM card should be inserted carefully, ensuring it is well-fitted and activated for data transmission. Finally, after installation, it is important to perform a check to ensure that the tracker is functioning correctly.

Explore all the features of the Concox GT03B and enjoy an efficient tracking experience. For even more practical management, consider the Trackar platform, which offers a solution with a one-time payment and easy access to all your device's information.

SMS Commands

1. Factory Reset

To restore the factory settings of the device, use the appropriate command. This is useful when you want to start from scratch with the tracker settings.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

Adjusting the time zone is essential to ensure that location data is accurate. Use the command below to set the desired time zone.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

APN configuration is crucial for connecting to the network. The information must be adapted according to the carrier of the used SIM card. Below are the commands for different carriers.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure to enter the correct credentials for the APN, username, and password.

4. DNS and Port Configuration

To ensure proper communication with the server, it is necessary to configure the DNS addresses and the port. Use the commands below to set the servers.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5023,,,,0,0,0,1,,,FFFF$

5. Sending Interval

The data sending interval can be adjusted as needed. This setting allows you to define the communication time and the movement angle.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

To ensure that the device operates correctly, it is important to configure the external battery. The command below allows you to adjust the power parameters.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

The global settings of the device can be adjusted to optimize performance. Use the command below to set these configurations.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

To increase vehicle security, you can enable the tow alarm. The command below activates this function.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

If you need to know the current location of the device, use the command to request the position. This can be done at any time.

AT+GTRTO=gv55,1,,0,,,,FFFF$

Special commands

1. Special Commands

Here are some special commands that can be used to manage the device more efficiently.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$