Installation Manual for Concox GT03

Introduction to the Concox GT03 Installation Manual

The Concox GT03 is a robust and reliable GPS tracking device designed to meet the needs of real-time monitoring of vehicles and assets. To ensure optimal performance, proper physical installation is essential. In this manual, we will cover the essential steps for installing the Concox GT03, including the recommended GPS position, connection to power supply, insertion of the SIM card, and verification procedures after installation.

The choice of GPS location should consider protection against interference and adequate exposure to satellite signals. The device should be powered through a stable energy source, while inserting the SIM card requires attention to ensure effective communication with the network. After installation, it is vital to perform checks to ensure that the device is functioning correctly and sending accurate data to the monitoring platform.

With the Concox GT03 properly installed, you will be able to take advantage of all the features it offers. For an even more complete tracking experience, explore the Trackar platform, which offers a one-time payment and advanced functionalities to optimize your monitoring.

SMS Commands

1. Factory Reset

To perform a factory reset of the device, a specific command must be sent. This procedure will restore all settings to factory defaults.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

Adjust the device's time zone using the appropriate command. This is essential to ensure that location data is accurate in relation to local time.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

It is essential to configure the APN correctly, as this varies depending on the chip provider and carrier. Ensure that you enter the correct APN, username, and password.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

Make sure that the APN information is correct for the device to function.

4. DNS and Port Configuration

Configuring the DNS server and port is crucial for the proper functioning of the tracker. It is important that the data is correct to ensure communication with the server.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5023,,,,0,0,0,1,,,FFFF$

Repeat the command for each server if necessary.

5. Sending Interval

Set the communication interval of the device, which can be adjusted in seconds. The angle can also be configured as needed.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

Adjust the settings of the device's external battery to ensure proper operation and battery longevity.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Perform the global configuration of the device, which includes various settings that affect the overall operation of the tracker.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activate the tow alarm to increase vehicle security. This setting helps detect any unauthorized towing attempts.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

Send a command to request the current position of the device. This is useful for monitoring real-time location.

AT+GTRTO=gv55,1,,0,,,,FFFF$

This command can be used to obtain the precise location of the device.

Special commands

10. Special Commands

Special commands allow for additional functions and maintenance on the tracker. Use them as needed.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$