Installation Manual for Concox Concox GT02D

Introduction to the Installation Manual for Concox GT02D

Welcome to the installation manual for the Concox GT02D GPS tracker. This device is designed to provide an efficient and practical solution for monitoring vehicles and other assets. In this guide, we will cover the essential aspects of physical installation, including choosing the ideal position for the GPS, connecting the power supply, inserting the SIM card, and verifying the device's operation.

Proper installation of the Concox GT02D is crucial to ensure optimized performance and accuracy in location tracking. The position of the GPS should be chosen carefully, avoiding obstructions that may interfere with the signal. The power supply must be securely connected to ensure that the device remains operational. Inserting the SIM card is a crucial step, as it is through it that the tracker communicates with the network.

After installation, we will perform a check to ensure that the Concox GT02D is functioning correctly. This process is vital to guarantee that you achieve the best monitoring results.

For a complete tracking and management experience, consider using the Trackar platform, which offers a one-time payment system and advanced features to optimize the use of your device. Let's get started with the installation!

SMS Commands

1. Time Zone Configuration

The first step in configuring the device is to adjust the time zone. This is crucial to ensure that location data is accurate in relation to local time.

#6666#stz#w0#

2. Carrier APN Configuration

It is vital that the APN settings, including username and password, are correctly entered, as they vary according to the carrier of the chip used. Ensure that you use the correct data for the tracker to function properly.

#6666#sapn#claro.com.br#claro#claro#

#6666#sapn#federal.br#federal#federal#

#6666#sapn#gprs.oi.com.br#oi#oi#

#6666#sapn#m2data.algar.br#algar#algar#

#6666#sapn#smart.m2m.vivo.com.br#vivo#vivo#

#6666#sapn#tim.br#tim#tim#

#6666#sapn#transmeet.br#transmeet#transmeet#

#6666#sapn#virtueyes.com.br#virtu#virtu#

#6666#sapn#voxter.br#algar#algar#

#6666#sapn#zap.vivo.com.br#vivo#vivo#

APN information should be verified with the carrier.

3. DNS and Port Configuration

To ensure proper communication of the tracker, it is necessary to configure the correct DNS servers and port. This is fundamental for data transmission.

#6666#wz#central.trackar.com.br#6023#

Use the same servers for all three commands.

4. GPRS Positioning Configuration

Activate the GPRS positioning function to allow the device to send its location efficiently.

#6666#gprs#1#

5. Sending Interval with Movement

Set the data sending interval when the device is in motion. The time can be adjusted between 10 and 200 seconds, with a default setting of 60 seconds.

#6666#smt#60#

6. Sending Interval without Movement

Configure the sending interval when the device is stationary. The adjustment can be made between 1 and 55 minutes, with a default setting of 55 minutes.

#6666#sst#55#

Special commands

7. Special Commands

Below are some special commands that can be used to manage the device more effectively.

DYD,000000#

#6666#cf#

HFYD,000000#

#6666#of#

#6666#gl#

#6666#ga#

#6666#sleep#1#

#6666#sleep#0#

#6666#vinfo#

#6666#reset#

#7839#UNLOCKIP#6666#

#6666#factory#