Coban TW-MD1101 Installation Manual
Introduction to the Coban TW-MD1101 Installation Manual
In this manual, we will cover the physical installation of the Coban TW-MD1101 tracking device, a model that stands out for its reliability and accuracy in vehicle monitoring. Proper installation is crucial to ensure the full functionality of the device and the effectiveness of location data collection.
To begin, it is essential to choose a strategic position for the GPS to optimize signal reception. The installation should be done in a location that minimizes obstructions and interferences, ensuring that the device has a clear view of the sky.
Additionally, the power supply of the Coban TW-MD1101 must be connected properly, following the manufacturer's specifications to avoid damage to the equipment. Don't forget to insert the SIM card, which will enable communication between the device and the network, being an essential step for the tracker to function.
Finally, we recommend conducting a thorough check after installation, testing all functionalities and ensuring that the device is operating according to expectations. For even more efficient management of your tracker, consider using the Trackar platform, which offers a one-time payment system and access to various monitoring functionalities.
SMS Commands
1. Start of Equipment Configuration
To begin configuring your GPS tracker, send the initial command. This is the first essential step to ensure that the device functions correctly.
begin123456
2. Time Zone Configuration
Adjust the time zone of the tracker so that it correctly records the local time. Use the appropriate command to set the desired time zone.
time zone123456 0
3. Carrier APN Configuration
It is crucial to enter the correct APN, username, and password information, as this data varies according to the chip carrier used. Make sure to use the appropriate commands for your carrier.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
Set the DNS servers that the tracker will use. It is important to ensure that this data is correct for effective communication.
Server 01, Server 02, Server 03: fill in with the appropriate information.
5. Vibration Alarm Activation
Configure the vibration alarm so that the tracker notifies about any unexpected movement. This can be essential for security.
shock123456
6. Tracking Activation
Activate the tracking function so that the device begins to monitor the location in real time. This command is essential for the tracker to function.
tracker123456
7. GPRS Transmission Activation
Enable data transmission via GPRS so that the tracker can send location and status information. This is vital for continuous communication.
gprs123456
8. Transmission Time Setting
Adjust the data transmission time while the equipment is in motion. A 60-second interval is recommended for efficient monitoring.
upload123456 060
The transmission time is adjustable as needed.
9. Sensor Sleep Mode
This mode allows the tracker to enter sleep mode after 5 minutes of inactivity, saving energy. The device will be activated upon detecting movement, receiving an SMS, or a call.
sleep123456 shock
Special commands
Special Commands
Below are some special commands that can be used for additional functionalities of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment