Coban LK710 Installation Manual

Introduction to the Coban LK710 Installation Manual

The Coban LK710 is an advanced GPS tracking device designed to provide security and real-time monitoring for vehicles and other assets. Proper installation of this equipment is crucial to ensure its effective operation and the accuracy of the data collected. In this section, we will address the fundamental aspects of physical installation, including the ideal position for the GPS, power connection, SIM card insertion, and system verification after installation.

To maximize the performance of the Coban LK710, it is important to choose an installation location that minimizes obstructions and maximizes GPS signal reception. The power supply should be securely connected, following the manufacturer's specifications to avoid damage to the device. Additionally, the choice of the SIM card should consider the operator's coverage in the installation area, ensuring that the tracker can efficiently send and receive data.

After installation, it is essential to perform a complete check to ensure that all components are functioning correctly. This manual provides detailed guidance for each of these steps, ensuring that you can make the most of the features of the Coban LK710.

For even more efficient management of your tracker, consider the Trackar platform, which offers a one-time payment solution for monitoring and detailed reporting.

SMS Commands

1. Device Setup Start

To start using the tracker, it is necessary to begin the configuration of the equipment. Use the specific command to initiate the process.

begin123456

2. Time Zone Configuration

Adjust the device's time zone to ensure that location information is accurate. The command should be followed by the desired configuration.

time zone123456 0

3. Carrier APN Configuration

It is crucial to correctly configure the APN, username, and password, as this information varies according to the SIM card carrier used. Check the list of commands for different APNs.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Ensure that the data is correct for the proper functioning of the tracker.

4. DNS and Port Configuration

Set the DNS servers and port for communication. This is essential to ensure that the tracker connects correctly to the application server.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. GPRS Transmission Activation

For the tracker to send location data, it is necessary to enable GPRS transmission. Use the corresponding command to activate this function.

gprs123456

6. Tracking Mode

Activate the tracking mode so that the device can monitor the location in real-time. This command is essential for the tracker to function.

tracker123456

7. Transmission Interval Configuration

Set the time interval at which the tracker should send location data. The value is adjustable in seconds, and the default is 60 seconds.

upload123456 60

8. Vibration Alarm Activation

Activate the vibration alarm so that the tracker can detect shocks and unwanted movements. This feature is important for the device's security.

shock123456

9. Sensor Sleep Mode

The tracker will enter sleep mode after 5 minutes of inactivity. Any movement or vibration will cause it to return to the active state. Activation mode can be done by movement, SMS, or call.

sleep123456 shock

Special commands

10. Special Commands

Use the special commands to access additional functionalities of the tracker, such as location, status check, and configuration.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format

These commands allow for more detailed control over the functions of the tracker.