Coban LK310 Installation Manual

Introduction to the Coban LK310 Installation Manual

The Coban LK310 is a GPS tracking device designed to provide accuracy and reliability in locating vehicles and assets. Proper installation of this equipment is crucial to ensure its optimal functioning. In this manual, we will cover the essential steps for the physical installation of the LK310, which include choosing the appropriate position for the GPS, connecting the power supply, inserting the SIM card, and verifying the device's operation.

The position of the GPS should be carefully selected, ensuring it has a clear view of the sky to optimize signal reception. The power supply should be connected according to the manufacturer's specifications, ensuring that the device receives enough energy to operate continuously. Inserting the SIM card is a vital step, as it allows communication between the LK310 and the tracking platform. Finally, conducting a check after installation is essential to confirm that the device is functioning correctly and sending location information as expected.

By following this guide, you will ensure that your Coban LK310 is ready to provide the efficient monitoring you need. For even more effective tracking, try the Trackar platform, which offers a one-time payment plan for simplified management of your device.

SMS Commands

1. Start Configuration

To begin the tracker configuration, send the initialization command. This will ensure that the device is ready to receive the next instructions.

begin123456

2. Set Time Zone

Adjust the device's time zone to ensure that location data is accurate. This setting is crucial for the proper functioning of the tracker.

time zone123456 0

3. Set Carrier APN

It is essential to configure the APN correctly, as this information varies by carrier. Make sure to use the correct data to ensure connectivity.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Check with your carrier for the correct APN data.

4. Set DNS and Port

Define the DNS servers and the port that the device will use to connect to the network. This configuration is essential for the correct communication of the tracker.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS. This will allow the tracker to send location and status information to the server.

gprs123456

6. Activate Tracking Mode

Put the device in tracking mode so that it starts monitoring the location in real-time.

tracker123456

7. Set Transmission Time

Define the time interval at which the tracker will send location data. This command adjusts the transmission time to 60 seconds.

upload123456 60

8. Activate Vibration Alarm

Enable the vibration alarm. This feature will alert the user in case of unexpected movements of the device.

shock123456

9. Set Sleep Mode by Sensor

The tracker will enter hibernation mode after 5 minutes of inactivity. It will be activated by any detected movement or vibration.

sleep123456 shock

Special commands

Special Commands

These additional commands allow quick access to information and change the device's operation modes.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format