Coban LK206 Installation Manual

Introduction to the Coban LK206 Installation Manual

The Coban LK206 device is an advanced solution for vehicle tracking, offering precision and reliability. In this manual, we will cover the essential steps for the physical installation of your GPS, ensuring that you can make the most of all the functionalities that the LK206 has to offer.

First, the position of the GPS is crucial for optimal performance. It is recommended to install it in a location that minimizes obstructions, such as under the dashboard or in areas with good visibility of the sky. The device should be powered through the correct connection to the vehicle's battery, ensuring it receives continuous power. Additionally, inserting the SIM card is an important step; make sure the card is active and has an adequate data plan for effective communication.

Finally, after installation, it is essential to verify the operation of the device by testing real-time tracking and the system's response. This will ensure that the Coban LK206 is operating as expected.

For efficient management of your tracker, consider using the Trackar platform, which offers a one-time payment and a user-friendly interface for vehicle monitoring.

SMS Commands

1. Start Equipment Setup

To begin the GPS tracker setup, it is necessary to send the initial command. This will allow you to access all the device's features.

begin123456

2. Set Time Zone

It is essential to adjust the time zone of the tracker to ensure that location data is recorded correctly. Use the appropriate command to set your time zone.

time zone123456 0

3. Configure Carrier APN

Configuring the APN is crucial for the tracker to connect to the carrier's network. The APN, username, and password information must be updated according to the chip provider. Check the list of available APN commands.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. Configure DNS and Port

To ensure that the tracker connects correctly to the server, it is necessary to configure the DNS and port. Use the provided commands to set the servers.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

It is essential to enable GPRS transmission so that the tracker can send real-time location data. Send the indicated command to activate this function.

gprs123456

6. Activate Tracking Mode

To start monitoring the location, it is necessary to activate tracking mode. Use the corresponding command to initiate this mode.

tracker123456

7. Configure Tracking Mode

Set the time interval for data transmission. The default value is 60 seconds, but it can be adjusted as needed. Send the command to configure the desired time.

upload123456 60

8. Activate Vibration Alarm

The vibration alarm can be activated to alert about unexpected movements. Use the appropriate command to enable this function.

shock123456

9. Configure Sleep Mode by Sensor

This mode allows the tracker to enter hibernation mode after 5 minutes of inactivity. It can be activated by movement, SMS, or call. Send the command to configure this function.

sleep123456 shock

The tracker will wake up with any vibration or movement.

Special commands

Special Commands

Here are some special commands that can be used for additional functionalities of the tracker.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format