Coban LK106 Installation Manual

Introduction to the Coban LK106 Installation Manual

The Coban LK106 is a GPS tracking device designed to provide security and effective monitoring of vehicles and objects. To ensure efficient operation, proper physical installation is essential. This manual guides you through the essential steps for installing the LK106, including the ideal position for the GPS, connecting to power, inserting the SIM card, and procedures for verifying operation.

The choice of installation location should be strategic, avoiding areas that may obstruct the GPS signal. The device's power supply should be secured, ensuring that the LK106 receives enough energy to operate without interruptions. Installing the SIM card is equally important, as it is through this that the tracker connects to the network to send accurate location information. After installation, it is crucial to conduct tests to ensure that the device is functioning correctly and sending real-time location data.

To further optimize your tracking experience, consider the Trackar platform, which offers a one-time payment solution to monitor your assets practically and efficiently. Make the most of your Coban LK106 with the right technology!

SMS Commands

1. Start of Configuration

To start using your tracker, you need to initiate the device configuration with the default password.

begin123456

2. Time Zone Configuration

Adjust the tracker's time zone to ensure that location data is accurate.

time zone123456 0

3. APN Configuration

It is essential to configure the APN correctly, as it varies by carrier. Make sure to use the correct information for your carrier.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

Set the DNS servers and port to ensure the tracker's connectivity with the central server.

SZCS,123456,DOMAIN=central.trackar.com.br:6013

5. Enable GPRS Transmission

Activate data transmission via GPRS so that the tracker can send location information.

gprs123456

6. Tracking Mode

Activate tracking mode so that the device starts monitoring your location.

tracker123456

7. Transmission Time Configuration

Set the time interval at which the tracker will transmit data. By default, the time is set to 60 seconds.

upload123456 60

8. Activate Vibration Alarm

Configure the vibration alarm so that the tracker can detect impacts.

shock123456

9. Sleep Mode by Sensor

The device will enter hibernation mode after 5 minutes of inactivity, waking up with any movement or vibration.

sleep123456 shock

Special commands

Special Commands

Here are some special commands that can be used to manage the tracker efficiently.

G123456

where

check123456

(s42,1234)

status

Param1

Param2

sos

sleep123456 10

sleep123456 shock

nosleep12345

shock123456

noshock123456

pwr1

pwr0

555

666

imei123456

rst

format