Coban GPS104 Installation Manual

Introduction to the Coban GPS104 Installation Manual

The Coban GPS104 is an advanced vehicle tracking device designed to provide efficiency and reliability in vehicle monitoring. In this manual, we will address the physical installation of the GPS, a crucial step to ensure its proper functioning. To begin, it is essential to choose the ideal position for the GPS within the vehicle, ensuring that the signal is received without obstructions. Additionally, the connection to the power supply must be made securely, following the manufacturer's guidelines to avoid operational failures.

Another important aspect is the installation of the SIM card, which must be done carefully to ensure the device communicates with the mobile network. After installation, it is essential to conduct a complete system check to confirm that all components are operating correctly and that tracking is active.

With the Coban GPS104, you will have the peace of mind to monitor your vehicle in real time, and for an even more complete experience, consider using the Trackar platform, which offers a one-time payment and additional features to optimize your tracking. Follow the instructions in this manual and make the most of your device's advantages.

SMS Commands

1. Start of Equipment Configuration

To begin using the tracker, it is necessary to start the device configuration. This will ensure that all functions are active and ready for use.

begin123456

2. Time Zone Configuration

Adjust the time zone of your tracker to ensure that location information is accurate. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Carrier APN Configuration

It is essential to correctly configure the APN, username, and password, as this information varies depending on the chip carrier used. Verify the correct data before sending the commands.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

Configure the DNS servers and the port to ensure the connectivity of the tracker. It is important that this data is accurate for proper functioning.

Server 01, Server 02, Server 03 must be filled with the correct information.

5. Vibration Alarm Activation

Activate the vibration alarm so that the tracker can alert you in case of unexpected movements. This function is essential for safety.

shock123456

6. Tracking Activation

For the tracker to start functioning, it is necessary to activate the tracking function. This will allow you to monitor the device's location.

tracker123456

7. GPRS Transmission Activation

Enable GPRS transmission so that the tracker can send location data in real-time. This configuration is crucial for efficient tracking.

gprs123456

8. Transmission Time Definition

Set the time interval for data transmission. The default time is 60 seconds while the device is in motion.

upload123456 060

The time can be adjusted as needed.

9. Sleep Mode by Sensor

The tracker enters sleep mode after 5 minutes of inactivity. Any movement or vibration will cause the device to return to active mode.

sleep123456 shock

The activation mode can be by movement, SMS, or call.

Special commands

Special Commands

Below are some special commands that can be used for additional functionalities of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456