Coban GPS102 Installation Manual

In this manual, we will discuss the installation process of the Coban GPS102 device, a high-quality GPS tracker ideal for monitoring vehicles and other assets. Proper installation is crucial to ensure the device operates correctly and accurately locates.

We will start by discussing the ideal position for the GPS installation, which should be chosen carefully to avoid obstructions that may interfere with the signal. Next, we will cover the power supply for the device, explaining how to connect it to the vehicle's power source safely and efficiently. The SIM card also plays a fundamental role in the GPS operation, and we will detail how to insert it correctly to ensure data communication.

Finally, we will conduct a system check after installation, ensuring that everything is operating as expected. Each step of this process is vital to optimize the performance of the Coban GPS102 and ensure that you get the most benefits from the tracker.

For even more efficient monitoring, consider using the Trackar platform, which offers a one-time payment system, making it easier to manage your device. Don’t miss the opportunity to enhance your experience with the Coban GPS102!

SMS Commands

1. Start GPS Configuration

To begin using the GPS tracker, it is necessary to initiate the device configuration process. This is essential to ensure that all functions operate correctly.

begin123456

2. Time Zone Configuration

Adjust the device's time zone so that location data is recorded correctly according to your region.

time zone123456 0

3. Configure Carrier APN

It is crucial to enter the correct APN settings, including username and password, as this information varies according to the chip provider and carrier. Check the available options below.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. DNS and Port Configuration

In this step, you must configure the DNS servers and the necessary ports for the tracker communication. Make sure to enter the correct data.

Server 01, Server 02, Server 03: information to be entered.

5. Activate Vibration Alarm

This function allows the tracker to detect vibrations and activate an alarm if they occur. It is a useful security measure.

shock123456

6. Activate Tracking

For the tracker to start sending location information, it is necessary to activate the tracking function.

tracker123456

7. Enable GPRS Transmission

Enable data transmission via GPRS so that the tracker can send real-time location information.

gprs123456

8. Set Transmission Time

You can adjust the time interval between the tracker transmissions. The default is 60 seconds while the device is in motion.

upload123456 060

9. Sleep Mode by Sensor

The tracker will enter hibernation mode after 5 minutes without movement. Any vibration or movement will reactivate it. You can wake it up by movement, SMS, or call.

sleep123456 shock

Special commands

Special Commands

Here are some special commands that may be useful for managing your tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456