Coban GPS-103-A Installation Manual
Introduction to the Coban GPS-103-A Installation Manual
The Coban GPS-103-A is a vehicle tracking device designed to provide security and real-time monitoring. In this manual, we will cover the physical installation of the GPS, detailing crucial aspects such as the ideal position for the device, connection to the power source, installation of the SIM card, and the necessary verification procedures to ensure that the system functions correctly.
Choosing the position of the GPS is fundamental to ensure optimized signal reception. It is recommended to position it in locations that minimize obstructions, such as under the dashboard or in high areas of the vehicle. The power supply should be securely connected, ensuring that the device receives continuous power. The installation of the SIM card should be done carefully, ensuring that it is correctly inserted and active. Finally, verifying the operation of the GPS is essential to confirm that all installation steps have been successfully executed.
By following this guide, you will be able to install the Coban GPS-103-A efficiently, providing your vehicle with a reliable tracking system. To further enhance your monitoring experience, consider the Trackar platform, which offers a one-time payment and advanced features for tracking management.
SMS Commands
1. Start Equipment Configuration
To begin using the GPS tracker, it is necessary to start the device configuration. This process is essential to ensure the proper functioning of the equipment.
begin123456
2. Time Zone Configuration
Adjust the time zone of the tracker so that the location information is correct in relation to the local time. This is essential for accurate tracking.
time zone123456 0
3. Carrier APN Configuration
It is crucial to update the APN, username, and password information according to the carrier of the SIM card used. This data varies by provider, so check the correct information.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
For the proper functioning of the tracker, it is necessary to configure the DNS servers. This ensures that the device connects correctly to the network.
Servidor 01:
Servidor 02:
Servidor 03:
5. Vibration Alarm Activation
The vibration alarm is an important feature that alerts about unwanted movements. Activate this function to increase the security of your tracker.
shock123456
6. Activate Tracking
To allow the device to start tracking the location, it is necessary to activate the tracking function. This allows you to monitor the equipment in real time.
tracker123456
7. Activate GPRS Transmission
Activating GPRS transmission is essential for the tracker to send location data via the cellular network. This configuration is fundamental for the device's operation.
gprs123456
8. Set Transmission Time
Adjust the time interval for data transmission. A time of 60 seconds is recommended when the equipment is in motion, ensuring frequent updates.
upload123456 060
Adjustable time
9. Sleep Mode by Sensor
This mode allows the tracker to enter hibernation mode after 5 minutes of inactivity. The device will be reactivated upon detecting movement, vibration, or a call.
sleep123456 shock
The tracker will 'wake up' with movement, SMS, or call.
Special commands
Special Commands
These additional commands provide extra functionalities for the tracker, allowing for more comprehensive control.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment