Installation Manual for Coban Coban GPS304
Introduction to the Installation Manual for the Coban GPS304
The Coban GPS304 is a vehicle tracking device that offers advanced features for real-time monitoring. Proper installation of this equipment is essential to ensure its full functionality and the accuracy of the collected data. In this manual, we will cover the physical installation of the Coban GPS304, with an emphasis on choosing the ideal position for the GPS, suitable power sources, inserting the SIM card, and the necessary steps for system verification.
The position of the GPS is crucial for clear satellite signal reception, avoiding obstructions that may interfere with communication. Additionally, the power supply must be securely connected, ensuring that the device operates continuously. The insertion of the SIM card should be done carefully, ensuring it is well positioned to facilitate data transmission. Finally, verifying the components and the operation of the device is an essential step to ensure that all settings are correct.
For those seeking an efficient tracking solution, the Trackar platform offers a one-time payment system, allowing you to enjoy all the benefits of the Coban GPS304 without monthly fees. Take advantage of this opportunity and enhance the security of your vehicle!
SMS Commands
1. Start of Configuration
To start using your tracker, it is essential to begin configuring the device. This will ensure that all functionalities are active and ready for use.
begin123456
2. Time Zone Configuration
Adjusting the time zone is essential for the tracker to correctly log the times of activities. Use the appropriate command to set the desired time zone.
time zone123456 0
3. APN Configuration
Configuring the APN is crucial for the tracker to connect to the carrier's network. APN information, username, and password must be entered correctly, as they vary depending on the chip provider and the carrier used.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
To ensure a stable connection, it is necessary to configure the DNS servers. This step is important for precise communication and location.
Server 01: Server 02: Server 03:
5. Vibration Alarm Activation
The vibration alarm is an important feature that alerts about unauthorized movements. Activate it to increase the security of your tracker.
shock123456
6. Tracking Activation
For the tracker to function correctly, it is necessary to activate the tracking function. This will allow you to monitor the device's location in real-time.
tracker123456
7. GPRS Transmission Activation
GPRS transmission is essential for the tracker to send location data. Activating it will ensure that you receive the necessary information.
gprs123456
8. Transmission Time Setting
You can adjust the time interval for data transmission. A time of 60 seconds is recommended for tracking in motion.
upload123456 060
Adjustable time
9. Sensor Sleep Mode
This mode allows the tracker to enter hibernation after 5 minutes of inactivity. It will be reactivated automatically with any movement or vibration.
sleep123456 shock
Wake-up mode: Movement, SMS or CALL.
Special commands
10. Special Commands
There are special commands that can be used for additional functions of the tracker. These commands allow access to information and adjustment of specific settings.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment