Coban Coban GPS107 Installation Manual

Introduction to the Coban GPS107 Installation Manual

The Coban GPS107 is a vehicle tracking device that offers advanced solutions for monitoring and security. In this manual, we will cover the essential steps for the physical installation of your GPS, ensuring that you make the most of the device's features.

Proper installation of the Coban GPS107 involves choosing the ideal position for the device, which should be discreet and protected from external interference. The GPS should be powered in a way that ensures a continuous power supply, thus avoiding failures during operation. Additionally, installing the SIM chip is a crucial step, as it is through it that the tracker connects to the network to transmit data. Finally, we will conduct a final check to ensure that all connections are secure and that the device is operating correctly.

By following this guide, you will ensure an effective and functional installation of your Coban GPS107. For even more efficient monitoring, consider using the Trackar platform, which offers a one-time payment system and additional benefits for tracking your fleet.

SMS Commands

1. Start Equipment Configuration

To begin using the tracker, it is necessary to start the device configuration. This will ensure that all functions of the tracker are operational and ready for use.

begin123456

2. Set Time Zone

It is important to adjust the time zone of the tracker so that location and event times are recorded correctly. Use the appropriate command to set the desired time zone.

time zone123456 0

3. Set Carrier APN

Configuring the APN is crucial for the operation of the tracker. You must enter the correct APN, username, and password information, which vary according to the carrier of the chip used. Make sure to use the correct data.

apn123456 allcom.br

apn123456 linksolutions.br

apn123456 m2data.arqia.br

apn123456 smart.m2m.vivo.com.br

apn123456 tim.br

apn123456 transmeet.br

apn123456 virtueyes.com.br

apn123456 zap.vivo.com.br

4. Set DNS and Port

Configuring the DNS and ports is essential to ensure proper communication of the tracker with the network. It is necessary to define the DNS servers for the connection to work properly.

Server 01, Server 02, Server 03: set as needed.

5. Activate Vibration Alarm

The vibration alarm is an important feature that alerts about unwanted movements. Activate this function to ensure the safety of your device.

shock123456

6. Activate Tracking

For the tracker to function properly, it is essential to activate the tracking function. This will allow you to monitor the device's location in real-time.

tracker123456

7. Activate GPRS Transmission

GPRS transmission must be activated for the tracker to send location data and other information. This configuration is fundamental for the operation of the device.

gprs123456

8. Set Transmission Time

You can adjust the data transmission interval of the tracker. It is possible to set a time of 60 seconds for the tracker to send information while in motion.

upload123456 060

The transmission time is adjustable according to your needs.

9. Sleep Mode by Sensor

This mode allows the tracker to enter sleep mode after 5 minutes of inactivity. Any movement or vibration will cause the device to return to an active state. This function helps save battery.

sleep123456 shock

The tracker can be awakened by movement, SMS, or call.

Special commands

Special Commands

Here are some special commands that can be used for additional functions of the tracker.

G123456#

where

gprs123456 0

sensitivity123456 + selecionar número 1, 2 ou 3!

check123456

speed123456 080

nospeed123456

shock123456

noshock123456

lowbatsms123456 on

sleep123456 time

sleep123456 shock

sleep123456 off

imei123456

reset123456