Coban Coban 303F Installation Manual
Introduction to the Coban 303F Installation Manual
The Coban 303F is a highly effective GPS tracking device designed to provide real-time monitoring solutions. In this manual, we will cover the physical installation of your Coban 303F, which includes guidelines on the best position for the GPS, power connection, SIM card insertion, and verification of the device's proper functioning.
To ensure optimal performance, it is essential to position the Coban 303F in a location that maximizes GPS signal reception, avoiding metallic obstructions and interferences. The power supply must be connected correctly, ensuring that the device is always operational. Do not forget to insert a compatible SIM card, which will allow communication between the GPS and the tracking platform. After installation, it is essential to perform a complete check to ensure that all functions of the device are in perfect condition.
By following these instructions, you will be prepared to make the most of your Coban 303F's features. For effective and hassle-free tracking, consider using the Trackar platform, which offers a one-time payment and a simplified monitoring experience.
SMS Commands
1. Start Equipment Configuration
To start using the Coban 303F tracker, it is necessary to begin the equipment configuration. Use the appropriate command for this.
begin123456
2. Time Zone Configuration
Adjust the device's time zone to ensure that location data is correct. The command should be sent with the desired configuration.
time zone123456 0
3. Carrier APN Configuration
It is crucial that the APN information, username, and password are updated according to the chip provider used. This information varies by supplier.
apn123456 allcom.br
apn123456 linksolutions.br
apn123456 m2data.arqia.br
apn123456 smart.m2m.vivo.com.br
apn123456 tim.br
apn123456 transmeet.br
apn123456 virtueyes.com.br
apn123456 zap.vivo.com.br
4. DNS and Port Configuration
It is necessary to configure the DNS servers to ensure proper communication of the tracker. Specify the desired servers.
Server 01, Server 02, Server 03: [insert information here]
5. Vibration Alarm
Activate the vibration alarm so that the tracker can alert you in case of unexpected movement.
shock123456
6. Tracking Activation
Enable the tracking function so that the device can send its location in real time.
tracker123456
7. Enable GPRS Transmission
For the tracker to send location data, it is necessary to enable GPRS transmission.
gprs123456
8. Set Transmission Time
Adjust the transmission time to 60 seconds while the equipment is in motion. This will ensure frequent updates.
upload123456 060
The time can be adjusted as needed.
9. Sensor Sleep Mode
The tracker will enter hibernation mode after 5 minutes of inactivity. It will be activated by vibrations, movements, SMS messages, or calls.
sleep123456 shock
Special commands
10. Special Commands
Explore the special commands that can be used for various functions of the tracker.
G123456#
where
gprs123456 0
sensitivity123456 + selecionar número 1, 2 ou 3!
check123456
speed123456 080
nospeed123456
shock123456
noshock123456
lowbatsms123456 on
sleep123456 time
sleep123456 shock
sleep123456 off
imei123456
reset123456
Own your tracking platform with a one-time payment