CCTR CCTR-808 Installation Manual

The CCTR CCTR-808 is a GPS tracking device designed to offer high precision and reliability in its monitoring operations. In this manual, we will address the physical installation of the equipment, which includes the correct positioning of the GPS, power connection, SIM card insertion, and the necessary verification procedures to ensure everything is functioning properly.

The installation of the CCTR CCTR-808 should be carried out in a strategic location where GPS signal reception is optimized. It is crucial that the device is powered correctly, using the appropriate source to avoid operational failures. Additionally, the SIM card insertion should be done carefully, ensuring it is well positioned to allow efficient communication.

After installation, it is essential to conduct a complete system check to ensure that the device is operating as expected. This step is crucial to avoid future problems and to ensure you get the most out of the functionalities of the CCTR CCTR-808.

For effective monitoring, we suggest using the Trackar platform, which offers a one-time payment system and a user-friendly interface to optimize the management of your trackers. Stay connected and informed about the location of your assets.

SMS Commands

1. Restore Factory Settings

To restore the factory settings of your device, send the appropriate command. This will reset all settings to the original defaults.

FACTORY*123456

2. Set Time Zone

Adjust the time zone of the tracker by sending the corresponding command. This is essential to ensure that location data is accurate according to your region.

TIMEZONE*123456*0

3. Configure Carrier APN

It is crucial to correctly configure the APN, username, and password, as this information varies by carrier. Make sure to use the correct data to ensure device connectivity.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Remember to replace the APN, username, and password values according to your carrier.

4. Set DNS and Port

Configure the DNS servers and port for the tracker communication. This is crucial to ensure that the device can connect correctly to the tracking server.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

Choose between the different available tracking modes. The standard mode works continuously, while the shock control mode activates the tracker only when in motion.

MODE*123456*1

MODE*123456*2

Mode 2 turns off the tracker after 5 minutes of inactivity, making it more battery-efficient.

6. Set Upload Interval

Adjust the time interval for data uploads. The interval can be set between 30 and 999 seconds, with 30 being the factory default. This affects how frequently the tracker sends data.

INTERVAL*123456*60

Special commands

Special Commands

Use special commands to perform additional actions on the tracker.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456

These commands allow you to query settings, obtain information, and manage the device efficiently.