Installation manual for the CCTR CCTR-802

Introduction to the Installation Manual for the CCTR CCTR-802

The CCTR CCTR-802 is a GPS tracking device designed to offer accuracy and reliability in its monitoring operations. This installation manual aims to guide you through the initial steps to ensure that your device is set up correctly.

The physical installation of the CCTR CCTR-802 involves several crucial steps, starting with choosing the ideal position for the GPS. It is essential that the device is located in a place that minimizes obstructions and maximizes signal reception. The power supply to the device must be done properly, ensuring that it is always on and operational. Additionally, the installation of the SIM chip should be done carefully, following the instructions to avoid damage. Finally, checking the device's functionality after installation is essential to ensure that all functions are operational and ready for use.

Explore all the features offered by the CCTR CCTR-802 and maximize your tracking potential with the Trackar platform, which offers a one-time payment and an intuitive interface to manage your tracking information.

SMS Commands

1. Restore Factory Settings

To return the device to factory settings, send the corresponding command. This is useful when you want to reset all settings to the original defaults.

FACTORY*123456

2. Set Time Zone

Adjust the device's time zone by sending the appropriate command. This is essential to ensure that location data is correct relative to local time.

TIMEZONE*123456*0

3. Configure Carrier APN

It is crucial to update the APN information, including username and password, according to your carrier's specifications. This information varies depending on the chip supplier and the carrier used.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to enter the correct information to avoid connectivity issues.

4. Set DNS and Port

Define the DNS servers and the port that the device should use for communication. This will ensure that the tracker connects correctly to the server.

IP*123456*central.trackar.com.br,5040

5. Tracking Mode

Choose between the available tracking modes. Mode 1 is the default and keeps the device always active, while Mode 2 activates the tracker only when motion is detected.

MODE*123456*1

MODE*123456*2

Consider battery consumption when choosing the tracking mode.

6. Set Upload Interval

Adjust the upload interval time in seconds. The interval can vary from 30 to 999 seconds, with 30 being the factory default.

INTERVAL*123456*60

Choose an interval that balances data updates and battery life.

Special commands

Special Commands

These commands provide additional functionalities to manage and query the device's settings.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

Use these commands to check settings and keep the tracker operational.