CCTR CCTR-700 Installation Manual

Introduction to the CCTR CCTR-700 Installation Manual

The CCTR CCTR-700 is an advanced GPS tracking device designed to provide an effective solution for monitoring vehicles and assets. In this manual, we will cover the necessary steps for the physical installation of your GPS, ensuring that you can make the most of the features of this equipment.

Proper installation of the CCTR-700 is crucial for its performance. We will start by choosing the ideal position for the device, which should be done to minimize interference and maximize signal reception. Next, we will discuss the power supply of the device, ensuring that it is connected securely and efficiently.

Additionally, it is important to insert the SIM card, which will allow the device to communicate with the network. Finally, we will perform a post-installation check to ensure that everything is functioning correctly before starting to use the device.

With the CCTR CCTR-700 properly installed, you will be able to monitor your assets in real-time through the Trackar platform, which offers an intuitive experience with a one-time payment. Don't miss the opportunity to optimize your management with cutting-edge technology!

SMS Commands

1. Restore Factory Settings

To restore the tracker to its original state, you must send the appropriate command. This is useful if you want to reset all custom settings.

FACTORY*123456

2. Set Time Zone

The tracker needs to know the correct time zone to log data accurately. The command must include the desired time zone.

TIMEZONE*123456*0

3. Carrier APN Configuration

APN settings are essential for the tracker to connect to the carrier's network. APN information, username, and password must be adjusted according to the carrier used.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to update the APN information according to the carrier of the chip used.

4. Configure DNS and Port

To ensure that the tracker connects correctly, it is necessary to configure the appropriate DNS servers and ports. This is crucial for device communication.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

The tracker can operate in different modes. Mode 1 keeps the device active continuously, while Mode 2 activates the tracker only when moving, saving energy.

MODE*123456*1

MODE*123456*2

Choose the mode that best suits your tracking needs.

6. Set Upload Interval

The upload interval can be adjusted to control how frequently the tracker sends data. The minimum is 30 seconds and the maximum is 999 seconds.

INTERVAL*123456*60

Special commands

7. Special Commands

There are special commands that allow you to manage and check various settings of the tracker. Use them as needed to keep the tracker operating optimally.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

These commands provide additional functionalities to manage the tracker efficiently.