CCTR CCTR-622 Installation Manual

Introduction to the CCTR CCTR-622 Installation Manual

The CCTR CCTR-622 is an advanced GPS tracking device designed to provide an effective and reliable solution for monitoring vehicles and assets. This manual aims to guide you through the physical installation process of your GPS, ensuring that you can make the most of all the device's features.

For proper installation, it is essential to consider the position of the GPS in the vehicle, as this affects tracking accuracy. Additionally, correctly powering the device, which can be done through the vehicle's battery or an external power source, is a fundamental step. Don't forget to insert the communication SIM card, which is responsible for transmitting location data.

After installation, verifying the device's operation is crucial. Make sure that the CCTR CCTR-622 is functioning correctly by conducting tracking tests to confirm the system's efficiency.

Take the opportunity to explore the Trackar platform, which offers a tracking service with a one-time payment, ideal for those seeking convenience and savings. Install your CCTR CCTR-622 and start monitoring your assets intelligently!

SMS Commands

1. Restore Factory Settings

To reset the device to its original settings, use the specific command. This is useful when you want to start from scratch or troubleshoot configuration issues.

FACTORY*123456

2. Adjust Time Zone

It is essential to set the time zone correctly to ensure that tracking data is synchronized with local time. Use the designated command for this task.

TIMEZONE*123456*0

3. APN Configuration

APN settings vary by carrier and the SIM card used. It is crucial to enter the correct information to ensure an efficient data connection. See the necessary commands for each carrier.

APN*123456*CLARO.BR

APN*123456*CLARO.COM.BR

APN*123456*GPRS.OI.COM.BR

APN*123456*SMART.M2M.VIVO.COM.BR

APN*123456*TIMBRASIL

APN*123456*ZAP.VIVO.COM.BR

USERNAME*123456*CLARO,CLARO

USERNAME*123456*OI,OI

USERNAME*123456*TIMBRASIL,TIMBRASIL

USERNAME*123456*VIVO,VIVO

Make sure to replace the APN, username, and password information as needed.

4. Set DNS and Port

To ensure the tracker connects correctly to the server, it is necessary to configure the DNS and port. Use the appropriate commands to set the desired servers.

IP*123456*central.trackar.com.br,5040

5. Select Tracking Mode

Choose between the available tracking modes. The default mode operates continuously, while the shock control mode activates the tracker only when in motion. Select the one that best meets your needs.

MODE*123456*1

MODE*123456*2

6. Set Upload Interval

The upload interval can be adjusted as needed, ranging from 30 to 999 seconds. The default is 30 seconds, but you can change it as desired.

INTERVAL*123456*60

Special commands

Special Commands

Here are some additional commands that can be used to manage and check the tracker settings.

CHECK*123456

URL*123456

CHECKPHONE*123456

CHECKPASSWORD#

ALARM*123456

RESET*123456

KEEPONLINE*123456

SHOCKCONTROLGPRS*123456

FACTORY*123456