How to Configure the Suntech ST410 Tracker

Configuring the Suntech ST410 tracker is an essential step to ensure that you can effectively monitor and manage your assets. In this guide, we will cover the main parameters that need to be adjusted, including APN configuration, DNS server, and the device's IMEI. Each of these elements is crucial for the proper functioning of your tracker, allowing it to connect to the network and send data in real-time.

Configuring the APN (Access Point Name) is fundamental, as it defines how the device connects to the internet through the mobile network. Additionally, the DNS server must be configured correctly to ensure that the tracker can resolve domain names and communicate with the necessary servers. Lastly, knowing and configuring the IMEI is important for the unique identification of the device on the network.

After performing these initial configurations, we suggest that you run some tests to verify that everything is working as expected. This will ensure that the Suntech ST410 tracker is ready for use, providing a reliable and efficient tracking experience.

To maximize the use of your tracker, consider integrating the Trackar platform, which offers a one-time payment system and advanced features for tracking management.

SMS Commands

1. Time Zone Configuration

The first step is to configure the device's time zone. It is essential that this configuration is done correctly to ensure that location data is accurate.

8960000w00

2. Update Interval with Ignition On

Set the tracker’s update time while the vehicle's ignition is on. The interval can be adjusted in seconds, with 60 seconds being the default for transmission while in motion.

8050000 60

3. Update Interval with Ignition Off

Configure the update time for when the ignition is off. The default is 3300 seconds, equivalent to 55 minutes, to ensure that the tracker continues to operate even when the vehicle is stationary.

8090000 3300

4. APN Configuration

It is crucial to configure the carrier's APN correctly, including user and password information, which may vary depending on the chip provider. Below are the commands for different APNs.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

For the tracker to start sending information, it is necessary to activate GPRS transmission. This configuration is essential for communication between the tracker and the server.

7100000

6. Configure DNS and Port

Configuring the DNS and port is necessary to ensure that the tracker connects correctly to the server. It is recommended to use the same server for all entries.

8040000 central.trackar.com.br,5011

7. Activate Motion Alert

The motion alert can be configured to activate without the need for a key. The alert time is adjustable in minutes, allowing customization as needed.

1810000T180

Special commands

Special Commands

Here are some special commands that can be used to manage the tracker more efficiently.

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format