How to configure the Suntech ST200 tracker

Introduction

Configuring the Suntech ST200 tracker is a fundamental step to ensure that you can monitor and manage your operations efficiently. This device offers a range of features that can be customized according to your specific needs. To get started, it is important to understand that the configuration involves entering essential information such as APN, DNS server, and IMEI, as well as conducting tests to ensure that the tracker is operating correctly.

Configuring the APN (Access Point Name) is crucial, as it establishes the device's connection to the mobile data network. After that, the DNS server should be configured to facilitate domain name resolution. The IMEI, a unique identifier, also needs to be entered for the tracker to function properly. Finally, conducting communication and location tests will ensure that all data is being transmitted correctly.

By following these steps, you will be able to make the most of the Suntech ST200's features, optimizing the monitoring of your activities. To enhance your tracking experience, consider using the Trackar platform, which offers a one-time payment service for efficient and practical management of your devices.

SMS Commands

1. Time Zone Configuration

It is essential to start the configuration process by adjusting the device's time zone. This ensures that location information is correct and synchronized with local time.

8960000w00

2. Update with Ignition On

Set the update interval when the vehicle's ignition is on. This time can be adjusted in seconds, allowing you to monitor the vehicle in motion.

8050000 60

60 seconds is the standard time for transmission during movement.

3. Update with Ignition Off

Set the update interval when the ignition is off. This time is also adjustable in seconds and is important for saving battery when the vehicle is stationary.

8090000 3300

3300 seconds correspond to 55 minutes.

4. Carrier APN Configuration

Configuring the APN is crucial to ensure that the tracker connects correctly to the carrier's network. The information must be entered correctly, as it varies between different carriers.

8030000 allcom.br

8030000 allcom.vivo.com.br

8030000 brt.br

8030000 claro.com.br

8030000 conect.algar.br

8030000 datatem.algar.br

8030000 eseye.com

8030000 gprs.amazoniacelular.com.br

8030000 gprs.oi.com.br

8030000 gprs.telemigcelular.com.br

8030000 jbgprs.algar.br

8030000 linksolutions.br

8030000 m2data.algar.br

8030000 m2data.arqia.br

8030000 m2data.vivo.com.br

8030000 m2m.vodafone.br

8030000 m2track.br,vivo,vivo#

8030000 meta.vivo.com.br

8030000 oktor.br

8030000 sercomtel.com.br

8030000 smart.m2m.vivo.com.br

8030000 ss.algar.br

8030000 tim.br

8030000 tmdata.tim.br

8030000 transmeet.br

8030000 up.m2m.vivo.com.br

8030000 virtueyes.vivo.com.br

8030000 voxter.algar.br

8030000 voxter.br

8030000 wap.ctbc.br

8030000 wl.vivo.com.br

8030000 y1.m2m.algar.com.br

8030000 zap.vivo.com.br

5. Activate GPRS Transmission

Activate GPRS transmission to allow the tracker to send and receive data through the mobile network. This configuration is essential for the device's operation.

7100000

6. DNS and Port Configuration

It is necessary to configure the DNS servers and the communication port. This ensures that the tracker connects correctly to the tracking server.

8040000 central.trackar.com.br,5011

7. Activate Motion Alert

Set up the motion alert to be triggered even without the key on. The activation time can be adjusted as needed.

1810000T180

The time is adjustable in minutes.

Special commands

Special Commands

rconf

Restart

Sleep0000 5

9400000

9410000

6690000

SLEEP0000 10

Reset

format

These commands can be used for various functions, such as querying settings, restarting the device, and restoring factory settings.