How to configure the MT Topten MT35 tracker

Configuring the MT Topten MT35 tracker is essential to ensure the proper and efficient functioning of the device. In this guide, you will learn how to adjust the necessary settings, including APN, DNS server, and IMEI, so that your tracker operates optimally.

The first step is to enter the correct APN, which allows the device to connect to the mobile data network. Next, configuring the DNS server is crucial for the tracker to communicate correctly with the tracking systems. Additionally, it is important to verify the IMEI of your device, as this ensures that the tracker is recognized by the network.

After making these configurations, it is recommended to conduct tests to ensure that all functionalities of the MT Topten MT35 are operating as expected. This includes checking the accuracy of tracking and the effectiveness of notifications.

With the Trackar platform, you can easily manage all the information from your tracker with a one-time payment, ensuring a hassle-free tracking experience. Follow the steps in this guide and make the most of your MT Topten MT35.

SMS Commands

1. DNS and Port Configuration

To ensure communication of the tracker, it is essential to correctly configure the DNS servers. We recommend using the domain's DNS, as shown in the examples below:

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

APN settings, including username and password, must be adjusted according to the chip's carrier. Each provider may have different information, so it is important to verify the correct data before making the configuration.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Time Configuration with Ignition On

The transmission interval can be configured in seconds. The default setting is 60 seconds, which determines the communication frequency while the ignition is on.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

The communication time can be adjusted in minutes. The default is 55 minutes, which defines the communication interval when the ignition is off.

SET HEARTBEAT=55

These settings are recommended to optimize the device's operation.

Special commands

5. Special Commands

Below are some special commands that can be used to manage the tracker.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT