How to configure the MT MT90 tracker

Configuring the MT MT90 tracker is a crucial step to ensure that you can effectively monitor your assets. This device, known for its accuracy and reliability, requires you to configure some essential parameters, such as APN, DNS server, and IMEI, to work properly with your tracking platform.

The APN (Access Point Name) is the gateway to the mobile data network, and its correct configuration is essential for the tracker to connect to the internet. Additionally, the DNS server must be configured to ensure that the device can resolve IP addresses, allowing efficient communication with the tracking platform. The IMEI (International Mobile Equipment Identity) is a unique identifier for your device, and its correct entry is vital for monitoring.

After configuring these parameters, it is recommended to perform tests to verify that the tracker is transmitting data correctly. This not only ensures that the installation was successful but also allows you to make the most of the MT MT90's features.

For a simplified and efficient tracking experience, consider the Trackar platform, which offers a one-time payment for full access to all features. Keep track of your assets securely and conveniently!

SMS Commands

2. APN Configuration

The APN configuration is crucial for the device's operation. Ensure that the APN, username, and password information are correct, as they vary according to the carrier and the chip used.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Time Configuration with Ignition On

The communication time with the ignition on can be adjusted in seconds. This parameter controls the frequency of data transmission while the vehicle is running.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

Just like with the ignition on, the communication time with the ignition off is adjustable, but in minutes. This interval determines the transmission frequency when the vehicle is stationary.

SET HEARTBEAT=55

Adjust this time as necessary to optimize battery consumption.

Special commands

1. Server Configuration

To ensure proper communication of the tracker, it is essential to configure the DNS and port correctly. Use the recommended domain to avoid connectivity issues.

SET URL=central.trackar.com.br:6216

SET URL=central.trackar.com.br:6216 ### 5. Special Commands

There are special commands that can be used to manage the device settings and obtain important information.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT

Use these commands with caution, as they can directly affect the operation of the tracker.