How to configure the MT MT88 tracker

Configuring the MT MT88 tracker is a fundamental step to ensure that you can effectively monitor and track your assets. In this guide, we will cover the key elements you need to configure, including APN, DNS server, and IMEI, as well as conducting tests to verify that everything is functioning correctly.

The APN (Access Point Name) is essential for the device to connect to the mobile data network, allowing the transmission of location information. The DNS server also plays a crucial role, as it facilitates domain name resolution, optimizing communication between the tracker and the monitoring platform.

Configuring the IMEI (International Mobile Equipment Identity) is another important step, as this unique number identifies your device on the network. After the initial configuration, it is advisable to conduct tests to ensure that all settings are correct and that the tracker is sending data as expected.

With the Trackar platform, you will have access to a robust tracking solution with a one-time payment, allowing you to efficiently monitor your assets without complications. Get ready to explore the features of your MT MT88 and maximize your security!

SMS Commands

1. DNS and Port Configuration

To ensure proper communication of your tracker, it is essential to correctly configure the DNS and the port. We recommend using the domain's DNS, as per the servers listed below.

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

The APN configuration is fundamental and must be carried out with the correct information, which varies according to the chip and the carrier. The following definitions are examples that can be used.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

Make sure to replace the APN, username, and password information as needed.

3. Communication Time with Ignition On

The communication time while the ignition is on can be adjusted in seconds, allowing you to set the transmission frequency according to your needs. The default interval is 60 seconds.

SET T3 FREQ=060

4. Communication Time with Ignition Off

Just like with the ignition on, the communication time with the ignition off is adjustable, but in minutes. The default is 55 minutes, allowing for an adequate transmission interval even when the vehicle is not in operation.

SET HEARTBEAT=55

These settings are recommended to optimize the performance of the tracker.

Special commands

5. Special Commands

In addition to the basic settings, there are special commands that can be used to manage the device more effectively.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT

These commands provide additional functionalities for managing the tracker.