How to configure the MT MT80i tracker

Configuring the MT MT80i tracker is a crucial step to ensure its full functionality and efficiency in monitoring vehicles or objects. In this guide, we will address the main parameters you need to adjust, such as APN, DNS server, and IMEI. These elements are fundamental for the device to connect correctly to the network and transmit location information accurately.

We will start the process with the APN configuration, which is the network access configuration, allowing the tracker to connect to the internet. Next, we will adjust the DNS server, which is responsible for resolving IP addresses, ensuring that the device communicates with the tracking platform. Finally, we will register the IMEI of the MT MT80i, a unique identifier that allows the device to be recognized on the network.

Additionally, we will conduct tests to confirm that all configurations have been applied correctly and that the tracker is operating as expected. By following each step of this guide, you will ensure that your tracker is ready to provide real-time data and enhance the security of what matters to you.

To further facilitate your tracking, consider the Trackar platform, which offers a one-time payment for full access to monitoring functionalities.

SMS Commands

2. Carrier APN Configuration

It is essential that the APN, username, and password information are properly updated according to the chip carrier used. Each carrier has its specifications.

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

3. Communication Time Configuration with Ignition On

The transmission interval can be adjusted in seconds. The default value is 60 seconds, which determines the communication frequency while the vehicle is in motion.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

This time is adjustable in minutes and defines the communication interval when the vehicle is stationary. The default is 55 minutes.

SET HEARTBEAT=55

These settings are recommended to optimize the performance of the tracker.

Special commands

1. DNS and Port Configuration

To ensure a stable connection, it is recommended to use the domain's DNS. You must configure the servers as indicated below for the tracker to work correctly.

SET URL=central.trackar.com.br:6216

SET URL=central.trackar.com.br:6216 ### 5. Special Commands

Here are some commands that can be used to manage and monitor the tracking device.

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT