How to configure the MT MT02 tracker

Configuring the MT MT02 tracker is a fundamental step to ensure its proper functioning and maximize efficiency in locating and monitoring assets. In this guide, we will cover how to adjust the APN settings, DNS server, and IMEI, as well as perform essential tests to ensure that the device is operating as expected.

The MT MT02 tracker offers a range of features that can be optimized through correct configuration. The APN configuration is crucial for communication between the tracker and the network, while the DNS server ensures that data is transmitted efficiently. The IMEI, in turn, is a unique identifier that allows the device to be tracked accurately.

Once all settings are adjusted, it is important to perform tests to verify that the tracker is sending information correctly. These tests will help identify any issues before the device goes into full operation.

To further facilitate the management of your tracker, consider using the Trackar platform, which offers a one-time payment system for efficient and accessible monitoring. Make the most of your MT MT02 with optimized configuration!

SMS Commands

1. DNS and Port Configuration

To ensure your device's connectivity, it is essential to correctly configure the DNS and server port. Use the following address as a reference for the server configuration: central.trackar.com.br:6216. This address should be replicated for the three servers, ensuring a stable connection.

SET URL=central.trackar.com.br:6216

2. Carrier APN Configuration

The correct APN configuration is crucial for the tracker to function. The APN, username, and password information must be adjusted according to the SIM card and carrier used. Below are the necessary commands for APN configuration:

SET APN=ALLCOM.BR:ALLCOM:ALLCOM

SET APN=JBGPRS.ALGAR.BR:ALGAR:ALGAR

SET APN=META.COM.BR:VIVO:VIVO

SET APN=SMART.M2M.VIVO.COM.BR:VIVO:VIVO

SET APN=TRANSMEET.BR:TRANSMEET:TRANSMEET

Make sure to enter the correct information according to your carrier.

3. Communication Time Configuration with Ignition On

Adjust the transmission interval while the ignition is on. The time is configurable in seconds. The default value is 60 seconds, which determines the device's communication frequency.

SET T3 FREQ=060

4. Communication Time Configuration with Ignition Off

Set the communication interval when the ignition is off. This time is adjustable in minutes, with 55 minutes being the default interval. This ensures that the device continues to function even when the vehicle is not in use.

SET HEARTBEAT=55

Special commands

5. Special Commands

Below are some special commands that can be used to manage the device:

GET NTW

GET INFO

GET PROG

GET LOCATION

SET SLEEP_MODE=1

WAKE_UP

SET IGNITION_DETECTION=0

SET ENGINEV=13200

GET IGNITION_DETECTION

SET RELAY=1

SET RELAY=0

REBOOT