How to configure the Jimi JM01 tracker

The Jimi JM01 tracker is an effective solution for monitoring the location of vehicles, people, or assets, providing security and peace of mind. To ensure that the device functions correctly, it is essential to perform the initial configuration, which involves setting parameters such as APN, DNS server, and IMEI. These steps are fundamental to ensure that the tracker connects properly to the network and sends location data accurately.

Configuring the Jimi JM01 is not a complicated process, but it requires attention to detail to avoid communication issues. Additionally, it is advisable to conduct tests after configuration to verify that the device is functioning as expected. A platform that facilitates this management is Trackar, which offers a one-time payment solution, allowing you to have full access to real-time tracking functionalities. Get ready to optimize security and monitoring with your Jimi JM01!

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone so that location information is accurate. Use the appropriate command to set the GMT.

GMT,W,0,0#

2. Update Time Configuration

The tracker’s update time can be adjusted between 5 and 18000 seconds. The interval X is the transmission time while the vehicle is moving, and Y is the time when the vehicle is stationary.

TIMER,60,3300#

3. Activate Voltage (External Voltage)

The external voltage setting should be adjusted as needed, with values ranging from 5 to 3600. This allows monitoring of the vehicle's voltage.

ADT,ON,3600#

4. Server Configuration

The servers must be configured correctly to ensure the device communicates with the tracking platform. Use the command to set the desired servers.

SERVER,1,central.trackar.com.br,5023,0#

5. Operator APN Configuration

The correct APN configuration is crucial for device connectivity. Check the operator's information and adjust as necessary.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. Activate GPRS

To connect the device to the network, it is necessary to activate GPRS. Use the corresponding command for this configuration.

GPRSON,1#

7. Activate Satellite Receiver

The satellite receiver can be activated for a period of 5 minutes to locate the device. Use the command to perform this activation.

GPSON#

Special commands

Special Commands

These additional commands allow for more advanced management of the device.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#