How to configure Jimi JM-VL02 Tracker

How to configure the Jimi JM-VL02 Tracker

The Jimi JM-VL02 tracker is a powerful tool for real-time monitoring and location tracking. To ensure you make the most of its features, it is essential to configure it correctly. In this guide, we will cover the fundamental steps for setting up your device, including APN configuration, DNS server adjustments, and IMEI verification. These steps are crucial for establishing effective communication between the tracker and the monitoring platform.

Configuring the APN is the first step, as it allows the device to connect to the mobile network. Next, configuring the DNS server ensures that information is sent correctly to the tracking platform. Additionally, verifying the IMEI is vital to ensure that the device is active and recognized on the network.

After completing these configurations, you will be able to conduct tests to confirm that everything is functioning as expected. The Jimi JM-VL02 tracker, when properly configured, provides security and peace of mind, allowing you to monitor location accurately.

For an even more optimized experience, consider the Trackar platform, which offers a one-time payment and facilitates the management of your tracker. Start exploring all the possibilities that the Jimi JM-VL02 and Trackar have to offer!

SMS Commands

1. Time Zone Configuration

It is essential to adjust the device's time zone to ensure that location information is accurate. To do this, use the appropriate command.

GMT,W,0,0#

2. Update Time Adjustment

The update time can be configured between 5 and 18000 seconds, with the factory default being 10 seconds for both on and off states. The transmission interval while the ignition is on or in motion is 60 seconds and, when off, is 3300 seconds.

TIMER,60,3300#

3. External Voltage Activation

The external voltage configuration allows you to set the amount of analog upload, which can vary from 5 to 3600. It is important to adjust according to the system's needs.

ADT,ON,3600#

4. DNS and Port Configuration

To connect the device to the server, it is necessary to configure the appropriate DNS and port. The settings must be entered as indicated, ensuring that the device connects correctly to the server.

SERVER,1,central.trackar.com.br,5023,0#

5. Carrier APN Configuration

It is crucial to update the APN, username, and password information according to the carrier of the used chip. Each carrier has specific settings that must be followed.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

To establish the data connection, it is necessary to activate the GPRS. This command ensures that the device can send and receive location information.

GPRSON,1#

7. Satellite Receiver Activation

To ensure accurate location, the satellite receiver must be activated for a period of 5 minutes. This allows the device to obtain a proper signal.

GPSON#

Special commands

Special Commands

These additional commands allow you to query and modify device settings conveniently.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#

These commands can be used to manage the tracker settings efficiently.