How to configure Jimi JM-VL01 tracker

How to configure the Jimi JM-VL01 tracker

The Jimi JM-VL01 GPS tracker is a powerful tool for monitoring vehicles and assets, offering a range of features that ensure security and real-time tracking. To make the most of your device, it is essential to correctly configure your tracking platform. In this guide, we will cover the initial steps to configure the tracker, including setting the APN (Access Point Name), configuring the DNS server, verifying the IMEI, and conducting tests to ensure everything is working as expected.

The APN is crucial for connecting your Jimi JM-VL01 unit to the mobile network, allowing data to be transmitted correctly. The DNS server also plays a fundamental role in resolving addresses, ensuring that the tracker can communicate efficiently. Additionally, verifying the IMEI is necessary to ensure that the device is properly registered and active on the network. After making these configurations, it is important to run some tests to confirm that tracking is operating smoothly.

For an even more optimized tracking experience, consider using the Trackar platform, which offers a one-time payment service, facilitating the management and control of your assets efficiently.

SMS Commands

1. Time Zone Configuration

To ensure the tracker functions correctly, it is essential to set the time zone. Use the appropriate command to adjust the time according to your location.

GMT,W,0,0#

2. Update Interval Adjustment

The tracker’s update time can be adjusted between 5 and 18000 seconds. The factory default is 10 seconds for both ignition on and off. Adjust as needed to optimize tracking.

TIMER,60,3300#

3. External Voltage Activation

Activate the external voltage for continuous monitoring. The analog upload should be set between 5 and 3600 seconds, depending on the monitoring needs.

ADT,ON,3600#

4. Server Configuration

It is necessary to configure the server address and port to ensure that the tracker sends data correctly. Use the commands to set the desired server.

SERVER,1,central.trackar.com.br,5023,0#

5. APN Configuration

APN configuration is crucial for device connectivity. Ensure to enter the correct carrier information, as it varies by SIM card provider. Use the listed commands for each carrier.

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,BRT.BR#

APN,CLARO.COM.BR#

APN,CONEXAO.GETRAK.COM.BR#

APN,ESEYE.COM#

APN,FEDERAL.BR#

APN,GPRS.OI.COM.BR#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,HINOVA.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,META.VIVO.COM.BR#

APN,OKTOR.BR#

APN,POWERTECH.ALGAR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,SS.CLARO.COM.BR#

APN,TIM.BR#

APN,TRANSMEET.BR#

APN,VIRTUEYES.COM.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,WAP.CTBC.BR#

APN,WL.VIVO.COM.BR#

APN,ZAP.VIVO.COM.BR#

6. GPRS Activation

Activate GPRS to allow data communication from the tracker. This step is crucial to ensure that the device sends location information.

GPRSON,1#

7. Satellite Receiver Activation

To ensure the tracker can capture the location, activate the satellite receiver for a period of 5 minutes. This is essential for the initial operation of the device.

GPSON#

Special commands

Special Commands

Below are additional commands that can be used to manage and query device settings.

PARAM#

SCXSZ#

GPRSSET#

STATUS#

ADT,OFF#

GPRSON,0#

GPRSON#

GPSDUP,A#

GPSDUP#

EXBATALM,ON#

EXBATALM,OFF#

RELAY,1#

RELAY,0#

ASETAPN,ON#

ASETAPN,OFF#

ANGLEREP,ON,20,2#

DISTANCE,300#

ICCID#

IMSI#

DOOR,0#

DOOR,1#

CLEAR#

WHERE#

URL#

POSITION#

VERSION#

RESET#

FACTORYALL#