How to configure GPS G900 tracker

Configuring the GPS G900 tracker is an essential step to ensure you can monitor your assets effectively and accurately. With a series of parameters to adjust, such as APN, DNS server, and IMEI, the process may seem complex, but with the correct instructions, you will be able to configure it quickly and efficiently.

First, configuring the APN is crucial, as it allows the device to connect to the mobile data network. The DNS server also plays an important role in resolving domain names, ensuring you can access your tracker's data without delays. Additionally, checking the IMEI of your GPS G900 is fundamental to ensure that the device is properly registered and active on the network.

After the initial configuration, it is advisable to conduct tests to confirm that all settings are functioning as expected. This process will ensure that you are ready to start monitoring in real-time and take advantage of all the features that the GPS G900 has to offer.

For an even more complete experience, consider the Trackar platform, which offers an intuitive tracking system with a one-time payment. Start optimizing your monitoring today!

SMS Commands

1. Start of Equipment Configuration

To begin the configuration of your GPS device G900, it is necessary to use the specific command. This step is crucial to ensure that the equipment is ready for use.

begin123456

2. Time Zone Configuration

Adjusting the time zone is essential for the tracker to function correctly. Use the appropriate command to set the time zone according to your location.

timezone123456 0

3. Carrier APN Configuration

Configuring the APN is essential for the tracker to connect to the data network. It is important to enter the correct APN, username, and password information, as they vary by carrier. Below are the commands for different APNs.

apn,m2track.br,vivo,vivo#

apn123456 allcom.br

apn123456 allcom.vivo.com.br

apn123456 brt.br

apn123456 claro.com.br

apn123456 datatem.algar.br

apn123456 eseye.com

apn123456 gprs.amazoniacelular.com.br

apn123456 gprs.oi.com.br

apn123456 gprs.telemigcelular.com.br

apn123456 linksolutions.br

apn123456 m2data.algar.br

apn123456 m2data.arqia.br

apn123456 m2data.vivo.com.br

apn123456 m2m.vodafone.br

apn123456 m2mprepgago.br arqia arqia

apn123456 meta.vivo.com.br meta meta

apn123456 oktor.br

apn123456 sercomtel.com.br

apn123456 smart.m2m.vivo.com.br

apn123456 ss.algar.br

apn123456 tim.br

apn123456 tmdata.tim.br

apn123456 transmeet.br

apn123456 virtueyes.vivo.com.br

apn123456 voxter.algar.br

apn123456 voxter.br

apn123456 wap.ctbc.com.br

apn123456 wl.vivo.com.br

apn123456 y1.m2m.algar.com.br

apn123456 zap.vivo.com.br

Make sure that the APN information is correct for the carrier used.

4. IP and Port Configuration

To ensure proper communication of the tracker, it is necessary to configure the IP and port of the server. Enter the desired server information.

Fill in the fields with the information for server 01, 02, and 03.

5. Enable GPRS Transmission

Activate data transmission via GPRS using the appropriate command. This is essential for the tracker to send real-time information.

gprs123456 1

6. Tracking Mode Configuration

Set the time interval for tracking, which can be adjusted according to your needs. The default value for transmission is 60 seconds.

itv123456 60

The transmission time can be adjusted as needed.

Special commands

Special Commands

Below are some special commands that can be used to check configurations and control the device.

check123456

getimei123456

speed123456 80

speed123456 0

DY123456 1

TY123456 1

Use these commands to monitor and control the device as needed.