How to configure the Concox Start S-2013 Tracker

The Concox Start S-2013 tracker is a powerful tool for vehicle monitoring, offering a range of features that ensure safety and control. For the device to function correctly, it is essential to carry out an adequate initial configuration. At this stage, you will need to adjust some fundamental settings, such as APN (Access Point Name), DNS server, and the device's IMEI number. These steps are crucial for establishing communication between the tracker and the monitoring platform.

Additionally, it is important to perform tests after configuration to ensure that all parameters are correct and the tracker is operating as expected. The configuration may seem complex, but by following the step-by-step guidelines, you will be able to optimize the use of your Concox Start S-2013. If you are looking for a complete solution for vehicle tracking, consider the Trackar platform, which offers a one-time payment and advanced features to facilitate your monitoring experience.

SMS Commands

1. Time Zone Configuration

To ensure that the tracker works correctly, it is essential that the time zone is configured. The configuration must be done through the appropriate command.

GMT,W,0,0#

2. Update Interval Configuration

The update interval of the tracker can be adjusted in seconds. It is possible to set different intervals for when the vehicle is in motion and when it is stationary.

TIMER,20,20#

3. Angle-Based Update

The location update of the tracker can be configured based on a specific angle and an adjustable detection time. This allows for greater accuracy in location.

ANGLEREP,ON,30,2#

4. Heartbeat Configuration

The heartbeat is a signal of life that the tracker sends at regular intervals. It is possible to adjust these intervals based on the vehicle's ignition state.

HB,1,55#

5. Server Configuration

It is necessary to configure the server address and port for the tracker to send data correctly. Make sure the information is accurate.

SERVER,1,central.trackar.com.br,5019,0#

6. APN Configuration

APN, username, and password settings are fundamental and must be entered correctly according to the carrier of the used chip.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

7. Forced Position Sending

To ensure that positions are sent, you can force the tracker to send data for a period of 5 minutes. This is useful for functionality testing.

LJDW#

Special commands

Special Commands

Here are some special commands that can be used for different functions of the tracker.

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

Note: the use of some commands may affect the vehicle's battery consumption.