How to configure the Concox Start S-2011 Tracker
Introduction to Configuring the Concox Start S-2011 Tracker
The Concox Start S-2011 tracker is an advanced solution for vehicle monitoring, offering robust and precise features. To ensure that the device operates efficiently, it is essential to correctly configure parameters such as APN, DNS server, and IMEI. This initial step is crucial for establishing communication between the tracker and the monitoring platform, allowing you to access real-time location data for your vehicle.
In this guide, we will cover the necessary steps to properly configure your Concox Start S-2011. We will explore how to enter the APN settings, which are essential for connectivity with the data network, as well as how to set the DNS server and validate the device's IMEI. After configuration, we will also discuss how to conduct tests to ensure everything is functioning as expected.
With the correct configuration, you will be able to make the most of your Concox Start S-2011 tracker's features, providing security and control over your assets. Don't forget that the Trackar platform offers a one-time payment option, further facilitating the monitoring of your fleet.
SMS Commands
1. Time Zone Configuration
The first step is to set the device's time zone. This configuration is crucial to ensure that location data is recorded correctly according to local time.
GMT,W,0,0#
2. Update Time Adjustment
Set the tracker’s update interval. You can configure different times for when the vehicle is moving and when it is stationary. This helps optimize battery usage.
TIMER,20,20#
X represents the time in motion and Y the time at rest.
3. Angle Update
This setting allows the tracker to update its location based on a specific angle. Both the angle and detection time can be adjusted.
ANGLEREP,ON,30,2#
The tracker will update its position when it detects a change of 30 degrees within a 2-second interval.
4. Heartbeat Configuration
The heartbeat is a signal sent periodically to indicate that the device is active. You can adjust the sending interval according to the vehicle's ignition.
HB,1,55#
X is the interval with the ignition on and Y with the ignition off.
5. Server Configuration
In this step, you must configure the server address and port. It is important that this information is correct to ensure the tracker’s communication.
SERVER,1,central.trackar.com.br,5019,0#
Repeat the command for each additional server you want to configure.
6. APN Configuration
The APN configuration is vital for data connection. Enter the correct details according to the carrier of the chip used. Each carrier has its specific information.
APN,AGILIS.ALGAR.BR#
APN,ALLCOM.ALGAR.BR#
APN,ALLCOM.BR#
APN,ALLCOM.VIVO.COM.BR#
APN,CLARO.COM.BR#
APN,DATATEM.ALGAR.BR#
APN,ESEYE.COM#
APN,GPRS.OI.COM.BR,OI,OI#
APN,GPRS.TELEMIGCELULAR.COM.BR#
APN,IOT4U.BR#
APN,JBGPRS.BR#
APN,LINKSOLUTIONS.BR#
APN,M2DATA.ALGAR.BR#
APN,M2DATA.ARQIA.BR#
APN,M2DATA.VIVO.COM.BR#
APN,M2M.VODAFONE.BR#
APN,M2TRACK.BR#
APN,OKTOR.BR#
APN,SMART.M2M.VIVO.COM.BR#
APN,SS.ALGAR.BR#
APN,TIM.BR,TIM,TIM#
APN,TRANSMEET.BR#
APN,VIRTUEYES.VIVO.COM.BR#
APN,VOXTER.ALGAR.BR#
APN,VOXTER.BR#
APN,ZAP.VIVO.COM.BR#
APN.BRT.BR#
APN.META.VIVO.COM.BR#
Make sure the data is correct to avoid connection issues.
7. Force Position Sending
If necessary, you can force the tracker to send its current position every 5 minutes. This can be useful in emergency situations or for intensive monitoring.
LJDW#
Special commands
1. Special Commands
There are several special commands that can be used to manage the tracker more efficiently. These commands allow you to query settings, enable or disable specific functions, and even restart the device.
PARAM#
GPRSSET#
STATUS#
STA_SENDGPS,1#
STA_SENDGPS,0#
STA_SENDGPS#
SENDS,0#
SOS,A,XXXXXXXXXXX#
CENTER,A,XXXXXXXXXXX#
CENTER,D#
SOS,D,XXXXXXXXXXX#
RELAY,1#
RELAY,0#
ANGLEREP,ON,30,2#
ICCID#
HBT,1,55#
DW#
WHERE#
RESET#
FACTORY#
Use these commands with caution, as some actions may alter the device's settings.
Own your tracking platform with a one-time payment