How to configure the Concox SL48 tracker

The Concox SL48 tracker is a powerful solution for real-time monitoring, ideal for those seeking security and control over the location of vehicles or objects. To ensure that your device functions correctly, it is essential to perform the proper configuration, which includes defining essential parameters such as APN, DNS server, and IMEI.

In this introduction, we will cover the initial steps for configuring the Concox SL48, allowing you to make the most of your tracker’s functionalities. Configuring the APN is crucial to ensure that the device connects correctly to the data network, while entering the DNS server allows communication with tracking servers to occur without interruptions. Additionally, the IMEI is a unique identifier that guarantees the authenticity of the tracker on the network.

Conducting tests after configuration is an important step to verify that all settings have been applied correctly and that the device is sending the necessary information. With the Concox SL48 properly configured, you will be able to monitor real-time location and receive alerts about any suspicious activity.

For a complete tracking and management experience, consider the Trackar platform, which offers a one-time payment and advanced features to optimize the use of your tracker.

SMS Commands

1. Time Zone Configuration

It is essential to adjust the GPS tracker’s time zone to ensure that location information is accurate. Use the appropriate command to set the GMT and the hour difference.

GMT,W,0,0#

2. Update Interval Configuration

Transmission intervals can be adjusted according to need. You can set different times for when the vehicle is in motion and when it is stationary.

TIMER,20,20#

X represents the interval in motion, while Y is for the interval when stationary.

3. Angle-Based Update

Location updates can be configured to occur based on a specific angle. This allows the tracker to be more efficient in certain situations.

ANGLEREP,ON,30,2#

The angle is defined in degrees and the detection time in seconds.

4. Heartbeat Configuration

The heartbeat interval can be adjusted to optimize battery usage. This sets the frequency with which the tracker sends information when the ignition is on or off.

HB,1,55#

5. Server and Port Configuration

Configure the server and port to ensure that the tracker connects correctly to the network. It is important to verify that the information is correct.

SERVER,1,central.trackar.com.br,5023,0#

6. APN Configuration

APN configuration is crucial for the tracker’s operation. The information must be adapted according to the carrier used. Check each of the listed commands.

APN,AGILIS.ALGAR.BR#

APN,ALLCOM.ALGAR.BR#

APN,ALLCOM.BR#

APN,ALLCOM.VIVO.COM.BR#

APN,CLARO.COM.BR#

APN,DATATEM.ALGAR.BR#

APN,ESEYE.COM#

APN,GPRS.OI.COM.BR,OI,OI#

APN,GPRS.TELEMIGCELULAR.COM.BR#

APN,IOT4U.BR#

APN,JBGPRS.BR#

APN,LINKSOLUTIONS.BR#

APN,M2DATA.ALGAR.BR#

APN,M2DATA.ARQIA.BR#

APN,M2DATA.VIVO.COM.BR#

APN,M2M.VODAFONE.BR#

APN,M2TRACK.BR#

APN,OKTOR.BR#

APN,SMART.M2M.VIVO.COM.BR#

APN,SS.ALGAR.BR#

APN,TIM.BR,TIM,TIM#

APN,TRANSMEET.BR#

APN,VIRTUEYES.VIVO.COM.BR#

APN,VOXTER.ALGAR.BR#

APN,VOXTER.BR#

APN,ZAP.VIVO.COM.BR#

APN.BRT.BR#

APN.META.VIVO.COM.BR#

APN, username, and password information must be updated according to the carrier.

7. Force Position Sending

If necessary, you can force the tracker to send its position for a specific period. This can be useful in emergency situations or intensive monitoring.

LJDW#

The tracker will send positions for 5 minutes.

Special commands

Special Commands

PARAM#

GPRSSET#

STATUS#

STA_SENDGPS,1#

STA_SENDGPS,0#

STA_SENDGPS#

SENDS,0#

SOS,A,XXXXXXXXXXX#

CENTER,A,XXXXXXXXXXX#

CENTER,D#

SOS,D,XXXXXXXXXXX#

RELAY,1#

RELAY,0#

ANGLEREP,ON,30,2#

ICCID#

HBT,1,55#

DW#

WHERE#

RESET#

FACTORY#

These commands allow various additional functionalities and configurations of the tracker.