How to Configure the Concox GV55 Lite Tracker

The Concox GV55 Lite is a GPS tracking device that offers an efficient solution for monitoring the location of vehicles and objects. To ensure that you can make the most of the features of this tracker, it is essential to perform the correct configuration. In this guide, we will cover the main steps to configure your Concox GV55 Lite, including setting up the APN, DNS server, IMEI, and conducting tests to verify that the device is functioning correctly.

Configuring the APN is one of the most crucial steps, as it allows the tracker to connect to the mobile data network. Additionally, adjusting the DNS server is essential to ensure that data is transmitted quickly and reliably. The IMEI, which is the device's identification number, also needs to be configured properly so that you can monitor its activities without interruptions.

After configuration, it is important to conduct tests to ensure that all features of the Concox GV55 Lite are operating as expected. This step will ensure that you can use the device with confidence.

To further optimize your tracking experience, consider using the Trackar platform, which offers a one-time payment and advanced monitoring features. Don’t miss the opportunity to enhance your security and control!

SMS Commands

1. Factory Reset

To restore the device to factory settings, use the appropriate command. This procedure is useful for troubleshooting or starting a new configuration.

AT+GTRTO=gv55,4,,,,,,FFFF$

2. Time Zone Configuration

Adjust the device's time zone to ensure that location data is accurate. This adjustment is essential for the proper functioning of the tracker.

AT+GTTMA=gv55,+,0,0,0,,,,,,FFFF$

3. Carrier APN Configuration

It is crucial to configure the APN, username, and password according to the carrier used. This information varies depending on the chip provider.

AT+GTBSI=gv55,agilis.algar.br,agilis,agilis,,,,,FFFF$

AT+GTBSI=gv55,allcom.br,allcom,allcom,,,,,FFFF$

AT+GTBSI=gv55,datacard.nextel3g.net.br,,,,,,,FFFF$

AT+GTBSI=gv55,jbgprs.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,linksolutions.br,link,link,,,,,FFFF$

AT+GTBSI=gv55,m2data.arqia.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,m2data.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,meta.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,smart.m2m.vivo.com.br,vivo,vivo,,,,,FFFF$

AT+GTBSI=gv55,ss.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,ss.br,arqia,arqia,,,,,FFFF$

AT+GTBSI=gv55,tim.br,tim,tim,,,,,FFFF$

AT+GTBSI=gv55,transmeet.br,transmeet,transmeet,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,algar,algar,,,,,FFFF$

AT+GTBSI=gv55,voxter.algar.br,nlt,nlt,,,,,FFFF$

4. DNS and Port Configuration

Set the DNS servers and port to ensure that the tracker connects correctly to the network. This is essential for data transmission.

AT+GTSRI=gv55,4,,2,central.trackar.com.br,5004,,,,0,0,0,1,,,FFFF$

5. Sending Interval

Adjust the communication interval and detection angle. This allows the device to send data at a specific interval, saving battery and optimizing performance.

AT+GTFRI=gv55,1,0,,0,0000,0000,,60,200,1000,,20,3300,,,,,FFFF$

6. External Battery Configuration

Configure the external battery to ensure that the device operates correctly even when the main power source is turned off. This is important for safety and continuity of tracking.

AT+GTEPS=gv55,2,1000,28000,2,3,0,0,0,0,1,30,30,,FFFF$

7. Global Settings

Adjust the general settings of the device to customize its operation. These settings can affect the performance and usability of the tracker.

AT+GTCFG=gv55,gv55,,1,0,,,3F,2,,1F2F,1,1,1,120,2,1,1,1,1F,0,FFFF$

8. Enable Tow Alarm

Activate the tow alarm function to enhance vehicle security. This setting allows the device to detect unauthorized towing attempts.

AT+GTTOW=gv55,1,5,1,60,0,0,0,0,2,3,2,,,,,,,,,FFFF$

9. Request Position

Send a command to obtain the current position of the device. This function is useful for real-time monitoring.

AT+GTRTO=gv55,1,,0,,,,FFFF$

Special commands

1. Special Commands

Use special commands for specific device functions, such as restarting, clearing memory, and activating or deactivating detections.

AT+GTRTO=gv55,3,,,,,,FFFF$

AT+GTHMC=gv55,1,00000:00:00,,,,,,,,,FFFF$

AT+GTRTO=gv55,D,,,,,,FFFF$

AT+GTRTO=gv55,0,,0,,,,FFFF$

AT+GTRTO=gv55,7,,0,,,,FFFF$

AT+GTJDC=gv55,2,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTJDC=gv55,0,25,,5,10,10,,0,0,0,0,,FFFF$

AT+GTOUT=gv55,1,0,0,0,0,0,,,,0,,,,,,,FFFF$

AT+GTOUT=gv55,0,0,0,0,0,0,,,,0,,,,,,,FFFF$